Flash your FX5900 to a FX5950U! - Page 22

jmke · 15th January 2004, 12:23

site is being worked on, online soon on a browser near you

187(V)URD@ · 15th January 2004, 23:02

Someone on this forum who flashed a 5900xt in a 5950ultra ??

15th January 2004, 23:23

tv-out doesn't work!!!!! aaaaaaaaaaaaaaaaaa I pluged in the tv-cable and it was no tv-out option after restarting the mashine. So it doesn't work!

((

jmke · 15th January 2004, 23:36

I think it needs to be enabled in the BIOS.

Most card manufacter(spelt wrong

) uses a different TV-Out chip as it is not included in the reference design of nVidia, or they have deals with tv-out chip makers, or other reasons, this makes flashing a bios which doesn't have your TV-out chip.. well.. make the TV-Out stop functioning.

hacking the BIOS to support your tv-out chip is the only solution, but don't ask me how

16th January 2004, 10:50

I knew it before that hacking the BIOS is the solution. But i don't know how either.

17th January 2004, 19:33

Hey there people i just tried the msi 5950 ultra on my msi 5900nu, it works great, at idle its at 30 degrees compared to the 36, and it averages about 6 degrees cooler avg. For my overclock im at 520/1000mhz, im at about 5800 3dmarks in 03. It worked very good. Clock per clock the 5950 u is slower, but we all know that cuz of the memory timings, i did this mainly for the higher core voltage. i have some benchmarks, i have yet to post them somewhere yet.

18th January 2004, 12:17

HOW DO I FIND OUT THE TEMP OF MY GRAPHICS CARD ???????????????????

what is a safe temp for an abit siluro 5900 flashed to a 5950, i want to overclock it, its at 300/946.7 or something at the mo.

18th January 2004, 12:22

get the latest rivatuner, it can monitor the temperature (if the videocard supports this, off course)

18th January 2004, 12:45

i tried rivatuner, but it dosent say the temp, its says the memory speeds of the graphics card, but not the temp !

i have an abit nf7-s 2.0, is there an option to enable temp sensing in bios or something?

jmke · 18th January 2004, 12:59

your videocard must have a temp probe onboard, install the latest drivers for your vidcard, if you can't find the temp. control tab, then your vidcard doesn't have it.

15th January 2004, 12:23	#211
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	site is being worked on, online soon on a browser near you __________________

15th January 2004, 23:02	#212
187(V)URD@ Member Join Date: Jan 2004 Posts: 923	Someone on this forum who flashed a 5900xt in a 5950ultra ?? __________________ AMD Opteron 146@3ghz H2O Storm \| DFI NF4 Ultra-D \| 2512MB Gskill LE \| X800GTO²@X850XT-PE \| 2250GB Hitachi \| Modded Aopen H600B\| Seasonic 600W \| MX510@450HZ \| 19\" TFT BenQ 937s+ \|3DMARK2001 AMD XP2400+@2600+ \| Epox 8rda+ \| 2*256 Twinmos BH5 \| Club3D 9600Pro \| Maxtor 80GB + 200GB \| server + moviestation \|

15th January 2004, 23:36	#214
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	I think it needs to be enabled in the BIOS. Most card manufacter(spelt wrong) uses a different TV-Out chip as it is not included in the reference design of nVidia, or they have deals with tv-out chip makers, or other reasons, this makes flashing a bios which doesn't have your TV-out chip.. well.. make the TV-Out stop functioning. hacking the BIOS to support your tv-out chip is the only solution, but don't ask me how __________________

18th January 2004, 12:59	#220
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	your videocard must have a temp probe onboard, install the latest drivers for your vidcard, if you can't find the temp. control tab, then your vidcard doesn't have it. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Corsair® Announces Updated Flash Voyager® GT Family	jmke	WebNews	0	14th October 2009 07:49
Corsair Launches 128Gb High Capacity USB Flash Drive	jmke	WebNews	0	13th August 2009 14:20
Corsair® Announces 16GB Flash Voyager® GT	jmke	WebNews	0	1st May 2009 10:17
Corsair announces Flash Voyager Port	jmke	WebNews	0	31st March 2009 18:15
Patriot Memory Releases 16GB microSDHC Flash Memory Card	jmke	WebNews	0	13th February 2009 14:15
Patriot Memory Announces Xporter Magnum 64GB USB Flash Drive	jmke	WebNews	0	31st October 2008 15:33
Corsair Introduces Flash Survivor - Rugged Usb 2.0 Flash Drive	jmke	WebNews	0	30th April 2007 14:09
Adtron Introduces 160Gb Solid State Flash Disk	jmke	WebNews	2	25th February 2007 23:49
Corsair Announces Immediate Availability of the New 16GB Flash Voyager USB Drives	jmke	WebNews	0	12th December 2006 11:04
FX5900 to Fx5950-U Bios Flash	Anleck	Hardware Overclocking and Case Modding	0	24th April 2004 10:49

15th January 2004, 23:23	#213
Peace Posts: n/a	tv-out doesn't work!!!!! aaaaaaaaaaaaaaaaaa I pluged in the tv-cable and it was no tv-out option after restarting the mashine. So it doesn't work! ((

16th January 2004, 10:50	#215
Peace Posts: n/a	I knew it before that hacking the BIOS is the solution. But i don't know how either.

17th January 2004, 19:33	#216
Docks Posts: n/a	Hey there people i just tried the msi 5950 ultra on my msi 5900nu, it works great, at idle its at 30 degrees compared to the 36, and it averages about 6 degrees cooler avg. For my overclock im at 520/1000mhz, im at about 5800 3dmarks in 03. It worked very good. Clock per clock the 5950 u is slower, but we all know that cuz of the memory timings, i did this mainly for the higher core voltage. i have some benchmarks, i have yet to post them somewhere yet.

18th January 2004, 12:17	#217
hajj_3 Posts: n/a	HOW DO I FIND OUT THE TEMP OF MY GRAPHICS CARD ??????????????????? what is a safe temp for an abit siluro 5900 flashed to a 5950, i want to overclock it, its at 300/946.7 or something at the mo.

18th January 2004, 12:22	#218
TeuS Posts: n/a	get the latest rivatuner, it can monitor the temperature (if the videocard supports this, off course)

18th January 2004, 12:45	#219
hajj_3 Posts: n/a	i tried rivatuner, but it dosent say the temp, its says the memory speeds of the graphics card, but not the temp ! i have an abit nf7-s 2.0, is there an option to enable temp sensing in bios or something?