| Thread Tools |
1st February 2007, 11:13 | #1 |
Madshrimp Join Date: May 2002 Location: 7090/Belgium
Posts: 79,021
| DFI LANParty UT ICFX3200-T2R/G Mainboard on ATI RD600 Chipset X-Bit labs takes an in-depth look at 'build for overclockers' DFI RD600 motherboard: "By simply adjusting the processor Vcore and Vmem you can only reach about 400MHz FSB speed. Further overclocking will require at least increasing the North Bridge voltage to 1.2V. To ensure that the mainboard is running stably at 450MHz FSB, this value needs to be set at 1.5V. And for the 500MHz FSB speed, this voltage setting needs to go up to 2V, which is 66% higher than the nominal. In this case the chipset North Bridge gets scarily hot, so you need to install a fan on the chipset North Bridge heatsink if you want to proceed. http://www.xbitlabs.com/articles/mai...-icfx3200.html
__________________ |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DFI LANPARTY DK P55-T3eH9 Mainboard Review | jmke | WebNews | 0 | 25th November 2009 11:40 |
DFI LanParty JR X58-T3H6 MicroATX LGA1366 Mainboard Review | jmke | WebNews | 0 | 9th May 2009 08:51 |
DFI LANParty UT ICFX3200 T2R/G | jmke | WebNews | 0 | 19th January 2007 23:53 |
ATI RD600 Chipset-DFI LANParty UT ICFX3200 T2R/G First Look | windwithme | Hardware Overclocking and Case Modding | 12 | 17th January 2007 23:56 |
DFI ICFX3200-T2R/G Motherboard – AMD RD600 Chipset Arrives | jmke | WebNews | 0 | 8th January 2007 16:53 |
DFI LanParty UT NF590 SLI-M2R/G Mainboard Review | Berry | WebNews | 0 | 26th December 2006 23:53 |
DFI LANParty UT ICFX3200-T2R: ATI's, err, AMD's RD600 finally arrives | jmke | WebNews | 1 | 18th December 2006 07:55 |
ATI RD600 for DFI only ? | thorgal | WebNews | 4 | 6th September 2006 17:13 |
Leaked slides reveal ATI RD600 chipset features | jmke | WebNews | 0 | 2nd June 2006 08:53 |
Thread Tools | |
| |