Madshrimps Forum Madness

Page 3 of 4

Show 40 post(s) from this thread on one page

Madshrimps Forum Madness (https://www.madshrimps.be/vbulletin/)

- Hardware Overclocking and Case Modding (https://www.madshrimps.be/vbulletin/f10/)

- - Stuck (https://www.madshrimps.be/vbulletin/f10/stuck-3748/)

jmke	11th January 2004 20:55

overclocking is. finding the exact limit of a system isn't :)

187(V)URD@

11th January 2004 22:05

Quote:

Originally posted by FreeStyler
You should first run memtest, prime stresses both the CPU and memory (and off course the CPU mem bridge of th chipset)
First test full on low speed CPU and high speed FSB's.
Memtest prime and 3Dmark.
Then as you found the max FSB, up the multi to find max CPU.
Testing again memtest prime and 3dmark.

No-one said good overclocking was a quick fix.

Thx freestyler gonna do what you just said after my exams :super: .

I get back soon when my overclock is finished.
:grin:

187(V)URD@

12th January 2004 19:13

got a problem, i tryed 13.5 * 166fsb = 2200mhz but my pc said xp1800+ :( , my pc doesn't accept the "high" mp ??.

I am now on 10*200fsb = 2ghz.

FreeStyler

12th January 2004 20:04

you're limited to a multi of max 13 or 12.5 (help me out here guys, I foggot)

jmke	12th January 2004 20:36

12.5 is the max without doing extra manipulations to the cpu

187(V)URD@

12th January 2004 21:09

And that are wiretricks ? explain plz :-)

jmke	12th January 2004 21:19

Quote:

Cut the 3rd and 5th bridge of L3 to unlock all the multys.

If i'm not mistaken you can cut them while *shortcircuiting* them. 5V + needles will do the trick. But i would ask a second opinion about this.

EDIT:
JCViggen: I would recommend using the 5V line from a PSU to cut the bridges. works perfectly and leaves no marks. takes 15 seconds

more info:http://www.beachlink.com/candjac/Workarounds.htm

187(V)URD@

12th February 2004 23:17

Wanted to know my CPU limit and it ran into 2300MHZ @ 1.75Vcore.
18*133 he wouldn't start up also increased VCORE to 1.8V still nothing.
Then I wanted to know my max FSB , was around 205-210 but i choose 200.

Didn't had luch time for my memory tbh but it is on 6-3-2-2 @ 200MHZ.

then i wanted to add the stuff togheter but it failed , wouldn't go to windows.

Now i am stuck on 2200MHZ @200FSB with 1.75Vcore and 6-3-2-2 @ 200MHZ.

Roomtemp. 20-23°C
Idle 37°C ---- Load 39-42°C
Cooler slk7

Nog iets dat ik niet begrijp is dat men Vcore in bios 1.75 is ,
in CPUZ = 1.6V
MBM = Core1 : 1.6V --- Core2 : 1.8V

Screen 1
screen 2

This is not so :mad:

Tum0r

12th February 2004 23:35

mod your psu rails

upping the 3.3 to a nice 3.5 will help u get a better fsb...
upping the 5V helps when u oc a radeon
upping the 12v looks good :p

all and all it a very easy mod @ xtreme

FreeStyler

13th February 2004 09:52

And you could throw your PC into a nuclear reactor. The extra energy might squeeze out a couple of extra MHz.

But it will most likely hurt the PC in the end.

All times are GMT +1. The time now is 23:04.

Page 3 of 4

Show 40 post(s) from this thread on one page