Wel prime and memtest are for later because i need to study :(.

did some quick tests :

CPU :




Mem :




I think the memory is quite low.

p.s: Artifacts when running 3Dmark2001

Aquamark is lower now , weird.

GFX points are lower then when i didn't overclock fsb & cpu

EDIT :Prime locks up

EDIT : 11.5*190 , stable and doesn't lock up, maybe fsb can't keep up.
Should a flash bios for higher fsb ?

Just tested my GF and overclocked it @ 265/580 , no artifacts and lockups (11.5*190fsb) , ran aquamark => +1700 points.

So I think my fsb isn't stable @200MHZ and my cpu isn't that hot @2200MHZ (40° idle).

incase you didn't noticed i am nooboverclocker :king:

EN -> NL ;)

Blame school jmke :p

What's your chipsetvoltage?

1.75 in bios but windows programs are saying 1.8v.

But i think its my fsb because i ran prime95 whole day and didn't lock up @2200mhz (fsb 190).

if you ran prime all day, and it didn't lock up, then it's NOT the CPU that's holding you down...mut be something else then...

Could you give me some specifications about the mem.??
the brand, speed...

Its in my first post i think , if you wanna know more I have to take my ram out of the pc.

You should first run memtest, prime stresses both the CPU and memory (and off course the CPU mem bridge of th chipset)
First test full on low speed CPU and high speed FSB's.
Memtest prime and 3Dmark.
Then as you found the max FSB, up the multi to find max CPU.
Testing again memtest prime and 3dmark.

No-one said good overclocking was a quick fix.