possition casefan on cpu?

kr15t0f · 2nd August 2004, 17:29

I'm planning a cut-out with plexi and a casefan blowing on my cpu.

I only got 1 question. Should I place te casefan directly on the cpu or move it a bit so it cools the mosfets, northbridge better?

Sidney · 2nd August 2004, 18:46

Case fan cooling;

http://madshrimps.be/gotofaqlink.php?linkid=1825
http://madshrimps.be/gotofaqlink.php?linkid=955

Quote:

Side Blowholes: These are simple enough, you have them either over your PCI Cards, your AGP card or your processor. Or all three if your case is large enough and you've got a Dremel (or equivalent) and some spare time. Can really help with cooling, but this will cause a lot of turbulence in your case as the air has no obvious route to follow and simply disturbs the existing airflow. It's been found that if you have a blowhole directly over your CPU then you can supply the CPU with room temperature air, thus significantly decreasing the temperature at which your CPU runs. It has also been found that if you have these blowholes that you can decrease the temperature of your video card but at the cost of increasing the temperature of your CPU. One final note on this. If your CPU has a fan which blows outwards, i.e sucks air throughthe heatsink and then exhausts out the top then you could also have a blowhole (or should it be called suckhole?) which can remove then vent the hot air out of your case. I'm not sure what effect this would have on general airflow/temperature of video cards etc. But if someone has this kind of setup let me know.

A thousand and one ways to walk a dog; The dog will piss to the nearest tree.

kr15t0f · 2nd August 2004, 19:07

so side casefan directly over the CPU. Gonna put a 120mm in my zalman PSU too I think. It's getting to hot in my case.

[Bonbon] · 2nd August 2004, 19:20

120 mm casefan in top , make a big hole in the bottom of the case. this will help and wont make a lot of noise

kr15t0f · 2nd August 2004, 19:28

Quote:

Originally posted by [Bonbon]
120 mm casefan in top , make a big hole in the bottom of the case. this will help and wont make a lot of noise

don't want to screw up my top panel like some people did :grin:.
If I mod my PSU it is less visible and it will cool maybe a bit less, but I don't want to screw up my case. If something goes wrong with my sidepanel I can always buy an other. BTW, I don't think there is enough room in my wavemaster to place a 120 mm fan, maybe if I remove the stuff my PSU is located in.. But then the top fan woudn't be located in the middle anymore, and that would be quiet ugly I think.

2nd August 2004, 17:29	#1
kr15t0f Member Join Date: Jan 2004 Posts: 1,600	possition casefan on cpu? I'm planning a cut-out with plexi and a casefan blowing on my cpu. I only got 1 question. Should I place te casefan directly on the cpu or move it a bit so it cools the mosfets, northbridge better?

2nd August 2004, 19:20	#4
[Bonbon] Member Join Date: Jun 2002 Posts: 690	120 mm casefan in top , make a big hole in the bottom of the case. this will help and wont make a lot of noise __________________ intelD820 (2*2.8), 1gb ram , 6600gt , lots of hdd

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Intel K series relieve CPU multiplier limitation-Core i7-875K OC performance Review	windwithme	Hardware Overclocking and Case Modding	5	12th August 2010 19:18
ProlimaTech Armageddon CPU Cooler Review	jmke	WebNews	0	9th July 2010 17:01
Corsair® Launches Air Series A70 and A50 High-Performance CPU Coolers	jmke	WebNews	0	2nd March 2010 09:05
Socket LGA1156 compatible Scythe CPU Cooler	jmke	WebNews	0	8th September 2009 08:35
Titan Fenrir CPU Cooler	jmke	WebNews	0	29th April 2009 10:16
The powerful VapoChill® CPU cooler goes mainstream: VapoChill Micro	jmke	WebNews	5	8th March 2005 20:27
Myth of CPU temperature	Sidney	General Madness - System Building Advice	2	25th December 2004 16:38
ABIT Unveils CPU Accelerator Technology on AA8XE series, AA8-DuraMAX and AG8	jmke	WebNews	0	9th November 2004 23:12
INFO: Reading the OPN code on your AMD Athlon 64 to find out what CPU you have	jmke	FAQ / INFO / HOW-TO	1	6th October 2004 14:35
HOW-TO: find max FSB / CPU Speed	jmke	FAQ / INFO / HOW-TO	0	25th May 2002 17:13

2nd August 2004, 19:07	#3
kr15t0f Member Join Date: Jan 2004 Posts: 1,600	so side casefan directly over the CPU. Gonna put a 120mm in my zalman PSU too I think. It's getting to hot in my case.