Athlon Low-end Tbred B Overclocking - Page 6

jmke · 24th March 2003, 21:46

"kt133a"

I wouldn't count on it

25th March 2003, 16:27

Quote:

Originally posted by jmke
"kt133a"

I wouldn't count on it

But are the L1 bridges of the 2400+ all factory-wise connected (or "not cut") before they leave the labs ? (because if so, I could up the mp a bit, from 15 to 16, and the fsb a slight bit, pushing the limits of my kt133a with an athlonXP @2.2GHz

)

jmke · 25th March 2003, 16:33

the L1 bridges are connected
but they don't control the MP over 13x.. I think.

25th March 2003, 18:03

Quote:

Originally posted by jmke
the L1 bridges are connected
but they don't control the MP over 13x.. I think.

Could be darn true, my bios only allows me to select a mp varying from 5.5 to 12.5 with my duron inserted.

"Darn !" :/

/mod: I remember something about the the last L3 bridge, more specific: if it was connected, you could select an mp-range of 5.5 to 12.5, and if not it was 13 to 20 I think. Most likely (mp is 15) the L3 bridge will be cut, giving the bios the signal to use the alternative mp-table, enabling the mp's ranging from 13 to 20.

Do I have misunderstood something, or is there still hope ?

/mod²:

http://www.msi.com.tw/program/e_serv...a896c37e40ae32

Quote:

So now i got my 2100+ running at 17*133MHz = 2266MHz. I had to up the voltage a bit, it´s now 1.65V instead of the default 1.6V to get it perfectly stable (from 2600+ processors actually use 1.65V as default). The other way to overclock this fantastic mobo is upping the FSB. That way I got it up to 13*160MHz = 2080MHz at 1.6V, but the USB-controller seemed to drop occasionally. You can get these speeds with proper aircooling and new AIUHB (0250 or newer) processors without problems (actually latter example needs some good ram too). Now I have put watercooling in my case, so it´s time to do some testing with higher voltages. 1.3V and 1.425-1.80V(0.025V increments) are the voltage choices in 3.6 BIOS by the way. Hope my experience gives faith to those, who are not sure this mobo can handle these new TBreds. Yes it can! Now it´s time to test if this 2100+ can brake the 3000+ barrier

*dancing around*

24th March 2003, 21:46	#51
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 78,416	"kt133a" I wouldn't count on it __________________

25th March 2003, 16:33	#53
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 78,416	the L1 bridges are connected but they don't control the MP over 13x.. I think. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Athlon 64 X2 3800+ 35w and X2 4600+ 65w Low Power Usage CPUs tested	jmke	WebNews	0	13th July 2006 10:27
AMD Athlon 64 3000+ (AM2) Overclocking Performance	jmke	WebNews	0	12th July 2006 11:13
Athlon 64 FX60 Overclocking: Stock Air, High End Air, Water, and Phase Change Cooling	jmke	WebNews	0	23rd March 2006 10:09
NVidia launches the 7300GS - Low End Cards with PS3.0	jmke	WebNews	0	18th January 2006 18:53
Opteron 165 Toledo Core Overclocking With High End Air	Sidney	WebNews	3	10th November 2005 16:17
Investigations into Socket 939 Athlon 64 Overclocking	Sidney	WebNews	1	4th October 2005 18:12
Athlon 64 X2 4800+ overclocking with high end air quest for 3GHz	Sidney	WebNews	0	11th June 2005 16:11
AMD Athlon 64 General Overclocking Guide	jmke	Articles & Howto's	3	26th May 2005 05:54
Athlon 64 3500+ Venice Core Overclocking	Sidney	WebNews	1	15th May 2005 04:53
AMD announces the END OF SOCKET 754 ATHLON 64 with deadline	Sidney	WebNews	0	30th April 2005 03:17