should I be happy or not - Page 2

3rd November 2002, 21:22

wrong account number
I was in a hurry, while mailing my dad i copypasted an example of the 'vermelding' where I should have copypasted the bank/account number
a small mistake causing lotsa trouble :/

7th November 2002, 09:36

pics upped, the moment I was going to cut in it my dad entered the garage to smoke one and was quite pissed off.... next try this evening

10th November 2002, 10:50

Is it just me or is 2000€ a bit much for all that? Here is my reccomendation for system components...

AMD Athlon 2400+
Epox 8K9A2+
Corsair PC3500
Geforce 4 Ti4600/Radeon 9700
and all the other stuff you wanted. You'll have much better system at a similar price (I think), which you can overclock to be much faster than a 2.4GHz P4.

If its Intel, Get:
P4 2.4GHz
Abit IT7MAX2 or the Asus equivalent
Corsair PC3500
Geforce Ti4200
etc.

I dont know about gigabyte boards. Also, Abits RMA policy doesnt extend beyond north america I think, not 100% sure. Seriously, when it comes to new computer parts warranty and service comes first.

10th November 2002, 12:41

indeed septimus, you ARE right
i COULD order that stuff...but the price would be outrageous
e.g.

rice stock case: 100€
I asked for him to order @colorcase that case... I had to pay 65€ more (transport included)... he asks 150€, colorcase 100€

so imagine what would happen if I did this for everything

he has printed the offer: 2650€, VAT included :wtf:

15th November 2002, 06:13

case done
cause I had too many problems with the first hole using the circlecutter, i used my "wipzaag"for the other holes
front will be cutted with circlecutter later (is plastic)

24th November 2002, 14:15

it's here
final pc:
p4 2.53
asus p4t533
1*256mb samsung rimm
17"TFT
laserprinter
logitech cordless desktop
48x writer (they gave me an aopen, if i want i can change it for a philips...should i do it?)
80gb hd fluid bearing

[Bonbon] · 26th November 2002, 20:24

Aopen cdrw 32/12/48 works fine over here
only the cd from aopen that was in the package failed to burn -ironic- , after that first i nver got an error again
burned about 200 cd's now with lots of different brands, no problems , even with 'boecht' cd's (no label und so)

26th November 2002, 20:32

damn, it was a MSI (they painted the frontplate)
winxp recognizes it, nero and so NOT

tried to update firmware, bios detects it but even winxp not anymore ???

lite on 52* arriving next week

10th November 2002, 12:41	#14
TeuS Posts: n/a	indeed septimus, you ARE right i COULD order that stuff...but the price would be outrageous e.g.rice stock case: 100€ I asked for him to order @colorcase that case... I had to pay 65€ more (transport included)... he asks 150€, colorcase 100€ so imagine what would happen if I did this for everything he has printed the offer: 2650€, VAT included :wtf:

26th November 2002, 20:24	#17
[Bonbon] Member Join Date: Jun 2002 Posts: 690	Aopen cdrw 32/12/48 works fine over here only the cd from aopen that was in the package failed to burn -ironic- , after that first i nver got an error again burned about 200 cd's now with lots of different brands, no problems , even with 'boecht' cd's (no label und so) __________________ intelD820 (2*2.8), 1gb ram , 6600gt , lots of hdd

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nvidia Is Happy With Performance of GeForce GF100 “Fermi” Graphics Card	jmke	WebNews	0	28th December 2009 10:30
Happy New Year 2008!	jmke	WebNews	4	1st January 2008 12:23
Happy Newyear from TTIC	jmke	WebNews	1	6th January 2006 06:31
Happy New Year	wutske	WebNews	19	2nd January 2006 10:40
Merry Christmas and Happy New Year from Scythe	jmke	WebNews	1	19th December 2005 19:40
Happy Chinese New Year!	Sidney	WebNews	4	8th February 2005 20:30
Happy [MAD] New Year 2005	jmke	WebNews	0	1st January 2005 15:22
Happy Birthday - Bjorn3D is 8 Years Old this Month	Sidney	WebNews	0	9th September 2004 14:19
Merry Christmas & Happy NewYear!	jmke	Off-Topic Hangout	15	25th December 2002 19:25

3rd November 2002, 21:22	#11
TeuS Posts: n/a	wrong account number I was in a hurry, while mailing my dad i copypasted an example of the 'vermelding' where I should have copypasted the bank/account number a small mistake causing lotsa trouble :/

7th November 2002, 09:36	#12
TeuS Posts: n/a	pics upped, the moment I was going to cut in it my dad entered the garage to smoke one and was quite pissed off.... next try this evening rest: http://www.madshrimps.be/upload/teus/case/PIC00003.jpg http://www.madshrimps.be/upload/teus/case/PIC00005.jpg http://www.madshrimps.be/upload/teus/case/PIC00008.jpg http://www.madshrimps.be/upload/teus/case/PIC00009.jpg http://www.madshrimps.be/upload/teus/case/PIC00010.jpg http://www.madshrimps.be/upload/teus/case/PIC00011.jpg http://www.madshrimps.be/upload/teus/case/PIC00012.jpg http://www.madshrimps.be/upload/teus/case/PIC00013.jpg http://www.madshrimps.be/upload/teus/case/PIC00014.jpg http://www.madshrimps.be/upload/teus/case/PIC00015.jpg

10th November 2002, 10:50	#13
septimus Posts: n/a	Is it just me or is 2000€ a bit much for all that? Here is my reccomendation for system components... AMD Athlon 2400+ Epox 8K9A2+ Corsair PC3500 Geforce 4 Ti4600/Radeon 9700 and all the other stuff you wanted. You'll have much better system at a similar price (I think), which you can overclock to be much faster than a 2.4GHz P4. If its Intel, Get: P4 2.4GHz Abit IT7MAX2 or the Asus equivalent Corsair PC3500 Geforce Ti4200 etc. I dont know about gigabyte boards. Also, Abits RMA policy doesnt extend beyond north america I think, not 100% sure. Seriously, when it comes to new computer parts warranty and service comes first.

15th November 2002, 06:13	#15
TeuS Posts: n/a	case done cause I had too many problems with the first hole using the circlecutter, i used my "wipzaag"for the other holes front will be cutted with circlecutter later (is plastic)

24th November 2002, 14:15	#16
TeuS Posts: n/a	it's here final pc: p4 2.53 asus p4t533 1*256mb samsung rimm 17"TFT laserprinter logitech cordless desktop 48x writer (they gave me an aopen, if i want i can change it for a philips...should i do it?) 80gb hd fluid bearing

26th November 2002, 20:32	#18
TeuS Posts: n/a	damn, it was a MSI (they painted the frontplate) winxp recognizes it, nero and so NOT tried to update firmware, bios detects it but even winxp not anymore ??? lite on 52* arriving next week