Problem with new mobo Abit KV8 pro

30th September 2004, 00:04

Bought new mobo from abit (Kv8 pro) and tried to install it today with new cpu (A64 +3000).
When I try to start up the pc i don't even get in bios. The post code display (on the mobo) gives me the code 9.f. which is not discribed in the manual, nor on Abit's site.

Graphic card is 9800pro, one nec 3500 dvd writer, one WD 120 gig SATA disk connected and the PSU is an antec 350 watt. And last but not least 512 Kingston ram PC3200 (value ram).

I already got the mobo out the pc, attached only the radeon and the ram and started up, but same problem (so I don't think it's the PSU that's too light).

I switched ram (same brand, different module), but same problem.

Disconnected the radeon, but same problem

Can someone help me because I don't knwo what to do

jmke · 30th September 2004, 00:27

PSU is enough for mobo/ram/videocard you have;

connect the speaker and try to boot again, what does it do?

try to swap memory for another brand if possible, might be the kingston; might be the videocard (but then you should hear beeps from the speakers) or the cpu

or the board; so many possibilties

try to post this question to the Abit USA forums (google it

) maybe some tech there knowns the 9F code

30th September 2004, 00:30

Jmke, thxs
When I connect the speaker, it gives (when it boots) one long beep and two short beeps. After that it just stops

jmke · 30th September 2004, 00:35

1 long, 2 short beeps = Display adapter problem (MDA, CGA)

http://www.pchell.com/hardware/beepcodes.shtml

do you have a spare PCI / AGP videocard ?

30th September 2004, 00:56

Jup, will try tomorrow my geforce 4mx. Will let you know

Altought: I checked the abit forums, and theer are apparantly other people with the same problem, but nobody can give a sollution that works

30th September 2004, 11:14

Tested with the geforce, same result. Contacted Tones and they asked to bring it back so they could test it. Will do that and see what that gives.

4th October 2004, 23:23

Wen,t to tones this weekend and apparantly the power supply we purchase there was f*cked. They tested it with a new one and everything worked perfect.

30th September 2004, 00:04	#1
dorfke Posts: n/a	Problem with new mobo Abit KV8 pro Bought new mobo from abit (Kv8 pro) and tried to install it today with new cpu (A64 +3000). When I try to start up the pc i don't even get in bios. The post code display (on the mobo) gives me the code 9.f. which is not discribed in the manual, nor on Abit's site. Graphic card is 9800pro, one nec 3500 dvd writer, one WD 120 gig SATA disk connected and the PSU is an antec 350 watt. And last but not least 512 Kingston ram PC3200 (value ram). I already got the mobo out the pc, attached only the radeon and the ram and started up, but same problem (so I don't think it's the PSU that's too light). I switched ram (same brand, different module), but same problem. Disconnected the radeon, but same problem Can someone help me because I don't knwo what to do

30th September 2004, 00:27	#2
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,020	PSU is enough for mobo/ram/videocard you have; connect the speaker and try to boot again, what does it do? try to swap memory for another brand if possible, might be the kingston; might be the videocard (but then you should hear beeps from the speakers) or the cpu or the board; so many possibilties try to post this question to the Abit USA forums (google it) maybe some tech there knowns the 9F code __________________

30th September 2004, 00:35	#4
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,020	1 long, 2 short beeps = Display adapter problem (MDA, CGA) http://www.pchell.com/hardware/beepcodes.shtml do you have a spare PCI / AGP videocard ? __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ABIT nForce 680i SLI mobo on show - IN9 32X-MAX	jmke	WebNews	0	9th November 2006 11:54
Abit AB9 Pro and AW9D MAX motherboard	jmke	WebNews	0	10th October 2006 13:57
HOWTO: Troubleshoot Any Networking Problem	jmke	FAQ / INFO / HOW-TO	0	15th February 2006 14:33
Abit KV8 Pro Motherboard	Sidney	WebNews	0	14th April 2005 08:56
Abit KV8 Pro	Sidney	WebNews	0	22nd February 2005 01:16
ABIT Launches Pro Gaming Hardware line Fatal1ty AA8XE and Fatal1ty X700XT	jmke	WebNews	0	2nd November 2004 18:22
Abit KV8 Pro Socket 754 Motherboard	jmke	WebNews	0	28th October 2004 11:23
Abit KV8 Pro Review	Sidney	WebNews	0	3rd October 2004 23:00
ABIT KV8 Pro	jmke	WebNews	0	10th August 2004 19:56
Abit KV8 Pro Athlon64 Motherboard @ GamePC	jmke	WebNews	0	14th May 2004 15:17

30th September 2004, 00:30	#3
dorfke Posts: n/a	Jmke, thxs When I connect the speaker, it gives (when it boots) one long beep and two short beeps. After that it just stops

30th September 2004, 00:56	#5
dorfke Posts: n/a	Jup, will try tomorrow my geforce 4mx. Will let you know Altought: I checked the abit forums, and theer are apparantly other people with the same problem, but nobody can give a sollution that works

30th September 2004, 11:14	#6
dorfke Posts: n/a	Tested with the geforce, same result. Contacted Tones and they asked to bring it back so they could test it. Will do that and see what that gives.

4th October 2004, 23:23	#7
dorfke Posts: n/a	Wen,t to tones this weekend and apparantly the power supply we purchase there was f*cked. They tested it with a new one and everything worked perfect.