Xp 1800+ Jiuhb Oc

FreeStyler · 19th April 2003, 23:16

Im currently running a XP 1800+ JIUHB with a Zalman CNPS 7000 modded to fit a AMD XP CPU.

It's currently running 2000MHz (2400+) @ 1.7V @ 32°C in prime95 test 400 (and counting).

Motherboard in an epox 8RDA+, running at 166FSB and 12* multiplier. the northbridge is actively cooled by a hercules cooler (the one from the 9700 series) and I stuck some heatsinks to the voltage regulators with some double sided tape. Southbridge is cooled by the ex-northbridge passive cooler.
Memory is some kingston cas2.5 Pc 2700 BGA running 2.5-2-2-4, synch. It did 2-2-2-3 stable at 133fsb.

We're running test 900 right now, and still stable at 32°C.

I am going to lower the fan speed of the northbridge cooler, as it's a bit high pitched, and vibrating (2 fan blades broke off, I glued them back on)
and the fanmate will be installed to since it's pushing loads of air.

Hmmm, this baby can go higher....

jmke · 19th April 2003, 23:31

did you find the "ronddellekes" to fit the CNPS 7000 ?

any pictures of that mod?

FreeStyler · 19th April 2003, 23:42

I used 2 standoff mounts from a matrix case screwed togerther.
I screwed those into 2 opposing holes around the socket, used some spacers from a matrix case to insulate them.
Finally screwed the cooler onto these, carefully, untill my thread was out.
I think it's way more then AMD recommended pressure, and definitly WAY more then the max recommended weight.

I added another 0.5 multiplier, I now got an XP 2600+

Won't go any further however, the systems boots into "safe mode" at 100MHZ *11.5 whenever I go above 13*. It doesn't seem to be a limit of any component, but rather a bug in the 13+ multi.

anyone know anything about this ??

jmke · 19th April 2003, 23:56

12.5x + multipliers aren't unlocked on the TbredB lowend XP's
only the lower ones are..

jmke · 20th April 2003, 11:32

LOL
http://www.madshrimps.be/?action=webnewsshow&id=1300

guess you're not the only one

FreeStyler · 20th April 2003, 11:44

And how do we do that.

lemme guess, buy PC 3200 memory. (looks in empty pocket)

nah it'll do for the moment, an XP 2600+ for the price of an 1800+

Anyway, it spent the night on prime95
no errors and 34°C after 11 hours, 58 minutes.

Pifast 100k digits in 0.23 seconds
1 million digits in 3.44 seconds
10 million digits in 57.84 seconds (hmm 13 megs of PI on my HD)

love OC

FreeStyler · 20th April 2003, 11:48

Suxx0rz

but mine was just a 10 minute job.
Most of it was to cut the bottom so it would fit over the socket.

To bad I don't have a metal workshop.

jmke · 20th April 2003, 12:04

not yet :grr:

FreeStyler · 20th April 2003, 15:59

justifies the evil grin.

Nah, I'm already breathing to much metal dust to be healthy.
not to mention the stuff blowing into my hardware.

FreeStyler · 20th April 2003, 22:26

Owke, it freaked out at 175 FSB.

I'm going to try to reduce the CAS latency of my memory to see if I can stabilize it.
If not then 170 *12.5 is about the limit.

Gives 1555 3d mark scores with a vanilla Ti4200 from Aopen, onboard sound (nforce) and 512MB memory.

19th April 2003, 23:16	#1
FreeStyler Member Join Date: Oct 2002 Location: Antwerp Posts: 1,186	Xp 1800+ Jiuhb Oc Im currently running a XP 1800+ JIUHB with a Zalman CNPS 7000 modded to fit a AMD XP CPU. It's currently running 2000MHz (2400+) @ 1.7V @ 32°C in prime95 test 400 (and counting). Motherboard in an epox 8RDA+, running at 166FSB and 12* multiplier. the northbridge is actively cooled by a hercules cooler (the one from the 9700 series) and I stuck some heatsinks to the voltage regulators with some double sided tape. Southbridge is cooled by the ex-northbridge passive cooler. Memory is some kingston cas2.5 Pc 2700 BGA running 2.5-2-2-4, synch. It did 2-2-2-3 stable at 133fsb. We're running test 900 right now, and still stable at 32°C. I am going to lower the fan speed of the northbridge cooler, as it's a bit high pitched, and vibrating (2 fan blades broke off, I glued them back on) and the fanmate will be installed to since it's pushing loads of air. Hmmm, this baby can go higher.... __________________ Put brain in gear BEFORE engaging mouth.

19th April 2003, 23:31	#2
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 78,416	did you find the "ronddellekes" to fit the CNPS 7000 ? any pictures of that mod? __________________

19th April 2003, 23:42	#3
FreeStyler Member Join Date: Oct 2002 Location: Antwerp Posts: 1,186	I used 2 standoff mounts from a matrix case screwed togerther. I screwed those into 2 opposing holes around the socket, used some spacers from a matrix case to insulate them. Finally screwed the cooler onto these, carefully, untill my thread was out. I think it's way more then AMD recommended pressure, and definitly WAY more then the max recommended weight. I added another 0.5 multiplier, I now got an XP 2600+ Won't go any further however, the systems boots into "safe mode" at 100MHZ 11.5 whenever I go above 13. It doesn't seem to be a limit of any component, but rather a bug in the 13+ multi. anyone know anything about this ?? __________________ Put brain in gear BEFORE engaging mouth.

19th April 2003, 23:56	#4
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 78,416	12.5x + multipliers aren't unlocked on the TbredB lowend XP's only the lower ones are.. __________________

20th April 2003, 11:32	#5
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 78,416	LOL http://www.madshrimps.be/?action=webnewsshow&id=1300 guess you're not the only one __________________

20th April 2003, 11:44	#6
FreeStyler Member Join Date: Oct 2002 Location: Antwerp Posts: 1,186	And how do we do that. lemme guess, buy PC 3200 memory. (looks in empty pocket) nah it'll do for the moment, an XP 2600+ for the price of an 1800+ Anyway, it spent the night on prime95 no errors and 34°C after 11 hours, 58 minutes. Pifast 100k digits in 0.23 seconds 1 million digits in 3.44 seconds 10 million digits in 57.84 seconds (hmm 13 megs of PI on my HD) love OC __________________ Put brain in gear BEFORE engaging mouth.

20th April 2003, 11:48	#7
FreeStyler Member Join Date: Oct 2002 Location: Antwerp Posts: 1,186	Suxx0rz but mine was just a 10 minute job. Most of it was to cut the bottom so it would fit over the socket. To bad I don't have a metal workshop. __________________ Put brain in gear BEFORE engaging mouth.

20th April 2003, 12:04	#8
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 78,416	not yet :grr: __________________

20th April 2003, 15:59	#9
FreeStyler Member Join Date: Oct 2002 Location: Antwerp Posts: 1,186	justifies the evil grin. Nah, I'm already breathing to much metal dust to be healthy. not to mention the stuff blowing into my hardware. __________________ Put brain in gear BEFORE engaging mouth.

20th April 2003, 22:26	#10
FreeStyler Member Join Date: Oct 2002 Location: Antwerp Posts: 1,186	Owke, it freaked out at 175 FSB. I'm going to try to reduce the CAS latency of my memory to see if I can stabilize it. If not then 170 *12.5 is about the limit. Gives 1555 3d mark scores with a vanilla Ti4200 from Aopen, onboard sound (nforce) and 512MB memory. __________________ Put brain in gear BEFORE engaging mouth.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Thermaltake Ram Orb Memory cooler (+ Gskill DDR3 1800) Review	jmke	WebNews	0	22nd October 2008 13:06
Walton Chaintech Debuts APOGEE GT DDR3 1800 4GB Low Voltage Memory Module	jmke	WebNews	0	25th July 2008 19:03
overclocking the athlon duron 1800	capitol15	Hardware Overclocking and Case Modding	3	18th June 2006 16:15
Amd Xp 1800 Pc	PLP	For Sale	3	13th August 2004 09:08
Where to get a JIUHB?	Kris	Hardware Overclocking and Case Modding	4	18th January 2004 22:07
Xp 1700+ Jiuhb Dlt3c	Tarantula	Hardware Overclocking and Case Modding	10	28th April 2003 16:18
Jiuhb	koensa	In Demand	7	26th April 2003 18:21
1700xp Jiuhb	piotke	In Demand	0	20th February 2003 06:58
JIUHB monsters	stronken	Site & Forum Feedback - Folding@Home	1	19th February 2003 22:59
1700xp Jiuhb 0302	stronken	For Sale	13	19th February 2003 22:32