It appears you have not yet registered with our community. To register please click here...

Go Back [M] > Hardware Madness > Hardware Overclocking and Case Modding
OneyedK's MSI OCC submission OneyedK's MSI OCC submission
FAQ Members List Calendar Search Today's Posts Mark Forums Read

OneyedK's MSI OCC submission
Closed Thread
Thread Tools
Old 1st May 2008, 14:30   #1
Posts: n/a
Default OneyedK's MSI OCC submission

Still finding ways to reach 5 posts
Can't post url's with results atm...
Old 1st May 2008, 14:50   #2
jmke's Avatar
Join Date: May 2002
Location: 7090/Belgium
Posts: 78,996
jmke has disabled reputation

fix0red, welcome onboard
jmke is offline  
Old 1st May 2008, 16:04   #3
Posts: n/a


I'll start with a little history, starting at the end of 2004, right after the Barton-days...

Good old northwood 2.4:
Comes with a worthless SuperPI (not 1.5) result:
Playing with the northwoord 2.8 version:

Everybody hated that Prescott 2.8, got it cheap, external watercooling:

The AMD-hype got to me, a Winchester 3200+ just had to be tested on a K8V board...
After some fiddling:
After another day:
(32 seconds superPI was not bad in those days)

It was wintertime so I needed another way to heat my room
an i560 came in handy, another prescott in a brand new package,
board was a P5AD2E Premium with Corsair ram:
Fast stock run:
Go for 30 seconds:
A little 3Dmark03 (with X800XT): e=10

I was so pleased and warmed with the i560 that I bought an i660
Little bench:
And SuperPI 1.5 arrived:
Too bad I don't have the 3D03 results anymore..

Legendary X800GTO² came to me...
So I flashed it to a X850XT PE and pencilmodded it, vGPU and vMEM...
554MHz corespeed and 629MHz memory speed. (zalman aircooled):
3Dmark05: e=12

I had sworn to switch over to AMD when they had the first dual core...
And they did, a Manchester 4200+ on the bench:
Combined with good TCCD-ram, I couldn't beat the i660, not with SuperPI
and not with 3Dmark03 (wich favours raw cpu power and memory bandwidth): e=10

IRL it was a fast combo, but the DFI with nVidia chipset proved never completely stable.

Back to play with an Intel, almost free Celeron D331:
full throttle:,234.JPG
4329MHz for a 2660MHz Celeron was not bad at all

Bought me a Smithfield D820 :
Nice, hot and stable.

RoaringEagle came to me to test a D830:
Good for a 3Dmark05 run at 4200MHz: e=12

My watercooling needed some work around the time core2 arrived, so I'm aircooling since...

E6400: (15.953s)

E6600: (14.000s)

Now I've got a Q6600 G0 (alas, not a very good one) on a ASUS P5E (droopin' like hell),
Will try to push it for this OCC...
My old X1900XTX will be paired with this one...
And some OCZ PC2 8000 Titanium Alpha VX2 (not super, but still good)
Hope to find some powerfull fans before the 9th, otherwise this list will have to be judged

GL to all contenders!
Old 5th May 2008, 21:41   #4
[M] Reviewer
thorgal's Avatar
Join Date: Sep 2005
Posts: 1,887
thorgal Freshly Registered

Welcome Karl, glad you made it.

Now for some recent results

thorgal is offline  
Old 6th May 2008, 11:18   #5
Posts: n/a

Originally Posted by thorgal View Post
Welcome Karl, glad you made it.

Now for some recent results
Thanks, just received word from Caseking, new fans wil arrive this week, so friday will be OC-day...
Old 7th May 2008, 11:55   #6
Posts: n/a

OK, let's get started while waiting for the Scythe Ultra Caze DFS123812H-3000 fans.
I will need them to be able to run 3Dmark03 stable at high speed...

The rig:
PSU: Tagan 580W
CPU: Intel Q6600 G0 (previously tested, rather hot for a G0)
cooler: Coolermaster GeminII with leftover SilenX and Papst fan
memory: OCZ Titanium Alpha VX2 PC2 8000 4-4-4-15 (on other board they wouldn't even do 1000MHz, not even with every trick in the book)
mainboard: ASUS P5E (X38, never tested before by me)
GPU: X1900XTX (stock cooler will be ripped apart and force cooled by the Scythes, if they arrive in time. This card didn't respond well to HR-03 or Zalman coolers, tried them all before)
HDD: 2x Raptor 150ADFD, configured as single disks.
This is my only rig, so I will be carefull with it. I don't want destroy any parts or any data. OS is Windows XP an will not be tweaked. (need all functions for day to day use)

OC results will be relative to stock, so I ran superPI and 3Dmark03 at stock speeds.
Stock means everything at normal speed, memory at 800MHz 4-4-4-15.
Northbridge strapped to 266MHz
vCore fixed.



The method:
1) finding max memory speed/performance by lowering the cpu multi, playing with the memory timings and northbridge strap settings.
2) finding max performance and balance between fsb and multi, in regard to the findings in (1)
3) overclocking the GPU, balancing between memory and corespeed with teh cpu at stockspeed.
4) final run with the combined findings of (1), (2) and (3)

They look like small steps, but they will take a while, will report back if I get results I like. Still hope the fans will arrive on time, I need them for stability and to cool the X1900XTX...
Old 7th May 2008, 12:06   #7
jmke's Avatar
Join Date: May 2002
Location: 7090/Belgium
Posts: 78,996
jmke has disabled reputation

up to the 30k
jmke is offline  
Old 7th May 2008, 13:59   #8
Posts: n/a

Thanks for the heads up!

Ok, step 1 finished...
This is not OC-friendly weather for aircoolers! Roomtemp is over 25°C!!!

Maxfsb topped out at 470MHz, luckily for me, 465MHz proved stable enough to bench...
I was able to memtest the RAM at 1239MHz, but it's too dangerous to really bench at 2.45Vmem atm. Not sufficiënt cooling and I like to finish this with all hardware still usable.

SuperPI @ 465MHzx7 1:1

3Dmark03 @ 465x7 1:1

I'll give the system some cooling down time and then try to better the SuperPI-score. (step 2)
Will have to wait for better fans before I heat it all up with 3D03.

Last edited by OneyedK : 8th October 2008 at 22:35.
Old 7th May 2008, 14:35   #9
jmke's Avatar
Join Date: May 2002
Location: 7090/Belgium
Posts: 78,996
jmke has disabled reputation

With 3255Mhz you are faster than this guy: who has 3322Mhz, or this one 3.6Ghz and slower than you
jmke is offline  
Old 7th May 2008, 15:27   #10
Posts: n/a

Originally Posted by jmke View Post
With 3255Mhz you are faster than this guy: who has 3322Mhz, or this one 3.6Ghz and slower than you
Saweet! Would the X38 be the reason???

Just finished testing x8, that's part 1 of step 2.

Couldn't boot at 465x8, but I could boot at 460x8, 1.4250Vcore set in bios.
Cranked the fsb up to 465 with setfsb, no real problems there...
Ah yes, I had to strap the chipset to 400MHz, 333MHz was impossible @ 465MHz fsb.
--> however, I cannot break the 465MHz-barrier of this combo, thried upping vcore, vNB, vSB and other equalising voltages in tiny steps, couldn't find a sweet spot that would allow me to crank it up.
Guess it's the price I pay for overclocking an aircooled quadcore

The results with 465x8:

SuperPI (13.594s):

3Dmark03 (23278):

2nd part of step 2 will be playing with the x9 multi.
Guess I'll have to do that tonight, a few other things need my attention now...
Closed Thread

Similar Threads
Thread Thread Starter Forum Replies Last Post
OneyedK MSI OCC Round 2 OneyedK Hardware Overclocking and Case Modding 11 6th June 2008 16:22
PowerToTheUsers' MSI Overclocking Contest Submission PowerToTheUsers Hardware Overclocking and Case Modding 30 24th May 2008 12:05
MSI Notebooks win prestigious Awards in Taiwan jmke WebNews 0 22nd May 2008 11:54
Piotke's MSI Overclocking Contest Submission piotke Hardware Overclocking and Case Modding 7 9th May 2008 16:10
Massman's MSI Overclocking Contest Submission Massman Hardware Overclocking and Case Modding 20 8th May 2008 10:54
A-star's MSI Overclocking Contest Submission A-star Hardware Overclocking and Case Modding 3 6th May 2008 08:10
blind's MSI Overclocking Contest Submission blind_ripper Hardware Overclocking and Case Modding 13 3rd May 2008 07:48
New MSI X48 Series Motherboard Sidney WebNews 0 21st January 2008 15:07
MSI P35 Motherboard Series Launched jmke WebNews 0 4th June 2007 13:04
MSI NX8800GTX-T2D768E and MSI NX8800GTS-T2D640E jmke WebNews 0 8th November 2006 09:52

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

All times are GMT +1. The time now is 21:23.

Powered by vBulletin® - Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO