MadShrimps Case Gallery - Page 5

jmke · 13th July 2004, 20:47

remove check from the option "Automatically parse URLs: automatically adds [ url ] and [ /url ] around internet addresses"

and put [ url ] before and [ /url ] after each link to the picture, without the spaces of course

13th July 2004, 21:01

Did'nt work , the forumscript puts dividers in the link if it's to long (%20% ) , but no worry's , i've put them on an other site .
pic1
pic2
pic3
pic4

jmke · 13th July 2004, 21:14

very nice cutout, like the handwriting style on the H

13th July 2004, 22:15

Thx , is a bit stolen from coca-cola

1st November 2004, 17:44

This is my almost completed tower.

Some photos showing how it has worked out.
there was enough sunlight coming in to make the case turn red for the camera.

Also the top blowhole window and the rear mesh

If I was doing this over again, I would have not used 4 fans for the radiator.

I really do not like the power supply at all.

I may still change that. I may also swap the radiator around with in inlet/outlets to the rear.

Having the inlets in the front took an extra bay.

Having 4 fans also took too many bays.

FULL IMAGE LINKS
http://www.moddedcomputers.com/mod/w..._isfarenuf.jpg
http://www.moddedcomputers.com/mod/worklog/rearview.jpg
http://www.moddedcomputers.com/mod/worklog/topview.jpg
http://www.moddedcomputers.com/mod/w.../rightside.jpg
http://www.moddedcomputers.com/image...w_monster2.jpg
http://www.moddedcomputers.com/mod/worklog/almost5.jpg
http://www.moddedcomputers.com/mod/worklog/almost3.jpg
http://www.moddedcomputers.com/mod/w..._frontview.jpg

jmke · 1st November 2004, 17:46

nicely done!

1st November 2004, 18:08

Thank you.

I planned the case with cad (micrografx) and tried to think though every detail. Even then, I ran into things that did not work like I planned. Towards the end, I really got tired of painting. At some point, I'll re-do the entire project.

29th November 2004, 03:15

Thermaltake Silent 775 Intel Pentium 4 LGA775 heatsink review

Should have posted these here. Very nice rigs guys, and I hope you enjoy mine.

jmke · 29th November 2004, 08:41

JoniNItro you're right, your system deserves a spot in here

29th November 2004, 12:19

most people don't like mine

I do have to admit the top comes up way too extreme, looking to change it and have a special thought about the sideplate. Cools great though: 3 rads, 2 pumps,...
anyway; please try and be polite because I had a lot of problems when I posted a picture at "another site".

13th July 2004, 20:47	#41
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	remove check from the option "Automatically parse URLs: automatically adds [ url ] and [ /url ] around internet addresses" and put [ url ] before and [ /url ] after each link to the picture, without the spaces of course __________________

13th July 2004, 21:14	#43
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	very nice cutout, like the handwriting style on the H __________________

1st November 2004, 17:44	#45
moddedcomputer Posts: n/a	UBER Tower This is my almost completed tower. Some photos showing how it has worked out. there was enough sunlight coming in to make the case turn red for the camera. Also the top blowhole window and the rear mesh If I was doing this over again, I would have not used 4 fans for the radiator. I really do not like the power supply at all. I may still change that. I may also swap the radiator around with in inlet/outlets to the rear. Having the inlets in the front took an extra bay. Having 4 fans also took too many bays. FULL IMAGE LINKS http://www.moddedcomputers.com/mod/w..._isfarenuf.jpg http://www.moddedcomputers.com/mod/worklog/rearview.jpg http://www.moddedcomputers.com/mod/worklog/topview.jpg http://www.moddedcomputers.com/mod/w.../rightside.jpg http://www.moddedcomputers.com/image...w_monster2.jpg http://www.moddedcomputers.com/mod/worklog/almost5.jpg http://www.moddedcomputers.com/mod/worklog/almost3.jpg http://www.moddedcomputers.com/mod/w..._frontview.jpg

1st November 2004, 17:46	#46
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	nicely done! __________________

29th November 2004, 08:41	#49
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	JoniNItro you're right, your system deserves a spot in here __________________

13th July 2004, 21:01	#42
beerke Posts: n/a	Did'nt work , the forumscript puts dividers in the link if it's to long (%20% ) , but no worry's , i've put them on an other site . pic1 pic2 pic3 pic4

13th July 2004, 22:15	#44
beerke Posts: n/a	Thx , is a bit stolen from coca-cola

1st November 2004, 18:08	#47
moddedcomputer Posts: n/a	Thank you. I planned the case with cad (micrografx) and tried to think though every detail. Even then, I ran into things that did not work like I planned. Towards the end, I really got tired of painting. At some point, I'll re-do the entire project.

29th November 2004, 03:15	#48
JoniNItro Posts: n/a	Thermaltake Silent 775 Intel Pentium 4 LGA775 heatsink review Should have posted these here. Very nice rigs guys, and I hope you enjoy mine.

29th November 2004, 12:19	#50
Dentnvr6 Posts: n/a	most people don't like mine I do have to admit the top comes up way too extreme, looking to change it and have a special thought about the sideplate. Cools great though: 3 rads, 2 pumps,... anyway; please try and be polite because I had a lot of problems when I posted a picture at "another site".

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nexus Technology BV releases full-atx case: NEXUS EDGE	jmke	WebNews	0	14th July 2009 09:42
Scythe Launches FenrisWolf: Full black aluminum PC Case	jmke	WebNews	0	15th June 2009 20:37
PR: Scythe Kaze Maru 140mm Case Fan With 120mm Mounting Holes	jmke	WebNews	0	30th August 2008 09:22
Thermaltake Armor VH6001 Case Review	jmke	WebNews	0	6th August 2008 08:30
Lian Li Tyr PC-X2000 Case	jmke	WebNews	0	24th July 2008 08:20
Moneual Lab MonCaso 972 HTPC Case	jmke	WebNews	0	21st July 2008 09:55
Nexus launches Caterpillar, a silent mid-tower ATX Case	jmke	WebNews	0	21st August 2007 18:59
Hiper intros first ATX Case, the Anubis	jmke	WebNews	0	17th August 2007 08:57
techPowerUp Case gallery launched & contest	Sidney	WebNews	0	2nd September 2005 04:33
Case Gallery Contest	Sidney	WebNews	0	10th April 2005 23:21