| Thread Tools |
7th September 2004, 16:50 | #1 |
Posts: n/a
| cant get fsb over 200??? ok, i jus got my new abit board in.....and i still cant get my fsb over 200, im using ocz pc3200 1gb platinum....not the revision 2, the old revision 2-3-2-5 timings. ive raised the mem voltage, chipset voltage, im using a mobile 2500 chip, nf7-s mobo rev2. i cant use the 12.5 multi anymore, but 12 and 13 are safe. my mem shoudl be able to hit 220 with the stock timings, i have tried to loosen the timings. any ideas??? cuz im stumped |
7th September 2004, 17:06 | #2 |
Posts: n/a
| tried with lower multi already? |
7th September 2004, 23:49 | #3 |
Posts: n/a
| as low as 10 |
28th September 2004, 01:00 | #4 |
Posts: n/a
| I know this is an oldie but ssl I have a very similar setup to you and have had the same problems (abit nf7-s, athlon-m 2500+, corsair ram, 450w antec psu). I've got a new antec 450w psu that provides enough juice, new xp athlon-m 2500+, low cpu temps, good memory, but i still can't get past 200fsb (can get to 202 but thats absolute max). The 2500+ is on 1.775v so I don't have much more headway. Have you had any luck? |
28th September 2004, 01:06 | #5 |
Posts: n/a
| no luck yet, im gonna try overclocking it from windows with the nvidia sys utility, gonna set my multi to 11, and voltage to 1.9 in the bios, and see how i can get it in windows, and prime it while im slowly movin it up...if it goes up at all |
28th September 2004, 01:24 | #6 |
Member Join Date: Mar 2004
Posts: 15,738
| Same board you have NF7-S R2. XP2600+ M 12x200; 11x215 @1.650 Volt; 12.5x200 @1.775 Volt. I am running it about 16 hours day 12x200. Sys 2 NF7 XP1700+ 10.5x200 @1.775 using PC2700. May be your BIOS setup.
__________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II |
28th September 2004, 03:54 | #7 |
Posts: n/a
| Have eather of you tried the l12 mod on your mobiles yet? I've never had the problem with mine but HaLDoL told me he once had a mobile that wouldn't do 200 fsb no matter what he tried. He did an l12 mod on it and it went straight to ~240 fsb without braking a sweat. |
28th September 2004, 13:16 | #8 |
Posts: n/a
| i tried the L12. my system wont power on with it.....maybe i did it wrong |
28th September 2004, 13:21 | #9 |
Madshrimp Join Date: May 2002 Location: 7090/Belgium
Posts: 79,021
| more then likely
__________________ |
28th September 2004, 16:16 | #10 |
Posts: n/a
| bah, ill try it again later, for now i gotta get around to tryin nvsys utility |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Max FSB on P45 | Kio | Hardware Overclocking and Case Modding | 4 | 8th November 2009 18:08 |
New BIOS makes new speed-FOXCONN MARS achieve Quad Core FSB 511MHz and DDRII 1350 | windwithme | Hardware Overclocking and Case Modding | 0 | 14th December 2007 15:29 |
Intel FSB 1333 CPUs prices revealed | jmke | WebNews | 1 | 21st June 2007 20:05 |
Core 2 @ 1333Mhz FSB tested | jmke | WebNews | 3 | 12th March 2007 23:10 |
High FSB medium latency versus Medium FSB low latency??? | Sidney | WebNews | 2 | 22nd September 2005 15:18 |
MSI's most Powerfull P4 Mainboard: MSI 925XE Neo Platinum 54G @ 1066Mhz FSB | jmke | WebNews | 12 | 11th November 2004 20:25 |
HOW-TO : reach your max stable fsb quickly, without hosing your OS. | RichBa5tard | FAQ / INFO / HOW-TO | 9 | 25th July 2004 16:04 |
max fsb KR7a | TeuS | Hardware Overclocking and Case Modding | 15 | 5th May 2003 17:29 |
Optimal For Overclocking: P4/2500 With 100 MHz FSB | Syco | Hardware Overclocking and Case Modding | 11 | 12th September 2002 18:46 |
HOW-TO: find max FSB / CPU Speed | jmke | FAQ / INFO / HOW-TO | 0 | 25th May 2002 17:13 |
Thread Tools | |
| |