The following is NOT a step-by-step guide and is only offered as a suggested means of mounting for the AMD A64/FX51.
Items needed:#6-32 threaded rod cut to two 4" lengths (two #6-32 4" pan head screws can also be used)
Four #6 locking washers
Four #6 nuts
Two #6 wing nuts
1/4" closed cell foam insulation (I used pipe wrap insulation for 1/2" pipe)
Seal string (VapoChill users this can be purchased at NAPA auto parts)
1/4" sheet of Plexi glass**
Jig saw with blade for cutting Plexi glass
Drill with 1/8" bit
Straight edge razor blade
Templates for the hold down brackets, they are not to scale but measurements are correct.
Template for Prometeia, click for zoom.
Template for VapoChill, click for zoom.