Intel Core 2 Duo E7200 Review

jmke · 17th September 2008, 14:27

It took 1.39 volts to get to 4050MHz but to go higher Prime stable required ridiculously high voltages. I dont mind pushing it but when running LinPack the temperatures spiked to 110 degrees right off the bat with the volts at the 1.55 I used to run the E8400 up to 4.5GHz. So knowing where my maximum speed was, I decided to see what kind of FSB I could get from the board and E7200. I dropped the multiplier down to 7 and started at 525FSB since this was the limit on the E8400. No problem! Moving in 5MHz increments I finally reached that wall at 545FSB. At this point it was time to start upping the multiplier to find the best mix of FSB and maximum speed that the E7200 would run at. 540 x 7 is the final overclock for this chip. Not quite the 2.0GHz worth of overclock I had originally thought possible but you gotta think, 1.55GHz worth of performance gained with a little work ain't too shabby.

http://www.overclockersclub.com/reviews/intel_e7200/

22nd September 2008, 08:38

sweet 4050Mhz is not bad!
This is going to be my next CPU for gaming!

Nice to read this:

Quote:

The gaming scores were reasonably close to those of the E8400 and when overclocked, there was a decent performance increase to make going after the additional MHz worthwhile.

why are these cons? :

Quote:

Cons:
1066MHz bus speed
3MB of shared L2 cache

jmke · 22nd September 2008, 14:49

well, we got 1333 FSB CPUs now, but that's no con. 3MB L2 cache is a bit low, but nothing too bad

22nd September 2008, 19:01

But should be OK for gaming?

17th September 2008, 14:27	#1
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	Intel Core 2 Duo E7200 Review It took 1.39 volts to get to 4050MHz but to go higher Prime stable required ridiculously high voltages. I dont mind pushing it but when running LinPack the temperatures spiked to 110 degrees right off the bat with the volts at the 1.55 I used to run the E8400 up to 4.5GHz. So knowing where my maximum speed was, I decided to see what kind of FSB I could get from the board and E7200. I dropped the multiplier down to 7 and started at 525FSB since this was the limit on the E8400. No problem! Moving in 5MHz increments I finally reached that wall at 545FSB. At this point it was time to start upping the multiplier to find the best mix of FSB and maximum speed that the E7200 would run at. 540 x 7 is the final overclock for this chip. Not quite the 2.0GHz worth of overclock I had originally thought possible but you gotta think, 1.55GHz worth of performance gained with a little work ain't too shabby. http://www.overclockersclub.com/reviews/intel_e7200/ __________________

22nd September 2008, 14:49	#3
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	well, we got 1333 FSB CPUs now, but that's no con. 3MB L2 cache is a bit low, but nothing too bad __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OC tutorial with Intel Core 2 Duo E7500 & DFI BI-P45 Elite	windwithme	Hardware Overclocking and Case Modding	3	20th September 2009 18:29
Intel latest Core 2 series CPU-Pentium E6300 and Quad Q8400 performance review	windwithme	Hardware Overclocking and Case Modding	3	19th June 2009 08:54
Intel Core 2 Duo E8400 Review	jmke	WebNews	0	4th September 2008 10:19
Intel Core 2 Duo E7200: The new budget king	piotke	WebNews	0	14th June 2008 18:19
Intel Core 2 Duo E8500 Review	Sidney	WebNews	0	4th March 2008 15:15
Intel Core 2 Duo E8500 45nm Wolfdale CPU Review	jmke	Articles & Howto's	4	20th February 2008 10:22
Intel Mobile Core 2 Duo "Merom" Bench-Test and Showcase	jmke	WebNews	0	28th August 2006 21:51
Intel Core Duo Overclocking Experience	jmke	WebNews	3	20th May 2006 15:36
Intel Core Duo on the desktop	jmke	WebNews	0	18th April 2006 09:32
ASUS W5F Intel Core Duo Notebook Review	Sidney	WebNews	0	17th February 2006 21:12

22nd September 2008, 19:01	#4
Justchill Posts: n/a	But should be OK for gaming?