T-Bred: max temp/voltage
 

I want my machine folding 24/7 (when I've got that slk800)

how many Volt may I give my CPU then maximum to make it last?
same for the temp!

It's a 1700+ T-bred
now @ 10*185 with 1.81 Vcore

(same question for Vulkaantje's 1800+ AGOIA btw)

1.85v & <50°C = ok

good voltage = max 1.85 vcore.
if your temps go higher than 50° you will have a BSOD :)

good luck.

thx
I'll get an SLK800 in 2 weeks (when colorcase is back open)

with 1.86 vcore and my v7+ at high RPM, I managed @ a LAN to reach 1900 mhz; it was stable but I didn't stress test it though

1850 now with fan at medium RPM, otherwise my mom can't bear it :D

I also have a Vcore question, how high can I set this with a palomino XP ?

2.1 ? Watercooled

temps are pretty important too :)

under 50°

pretty cool then
although personally I wouldn't pass 2v for long periods

I got a tbredA on air here with close to 2v & running fine, but I don't have to try much higher ;)

dont mind the temps, they are fuxored, all the temps are CPU temp :)

:mad:

allemaal heel tof, da zijn Tbreds, maar ik heb een palominoke, en da zal zo blijven voor een tijdje.

Dus niet meer als 2V voor een palomino ?

Want ik zie zelfs hier en daar Tbreds aan 2.1 Vcore, en palomino's kunnen toch beter tegen hoge Vcore. Of niet ,

ik zou niet boven de 2v gaan, zeker niet als hij een tijdje moet meegaan :)
electronen migratie ....

oke, heb nu als max vcore 1.95, soms piekt da tot 1.99. toto nu toe nog niet over 2V geweest. Wel maar een uurtje zitten spelen.

Dus niet veranderen, die mod.

hmmm is wel wa veel volt om die XP1600+ @ 1705 te krijgen in my humble opinion

mene XP1600+ deed 1785 op 1.85v

momentel nog niet hoger getest wegens geen deftige koeling.

op 1.85 doet em max 1628 stabiel. Maybe moederboerdje niet goed genoeg ofwel voeding like I said.

MSI k7t 266 Pro2
Voeding is cheapo 300 watt

cpu niet goed genoeg in my humble opinion :)

Hmz, nu krijg'k mijnen 1800+ palomino op 1725 primestable @1.85Vcore, stressed 43°. Hoe hoog zou'k ongeveer geraken met 1.95Vcore?

trial and error ?
:p

he's running his @ 2v for some weeks/months now

temps not above 50° = BS
I have one running at as high as 55°C mean on the die, rocketing stable, not one error priming 24+ hours, nor cpustab 24+ hours, nor folding for one straight week now
socket doing 40°C
that is at 1.76 volts

you guys are measuring socket temps with those high voltages... I think...

nope it is full of truth, HARD truth even :)

I have this XP2200+ running @ 2030Mhz with 1.87v
due to the f*cked up KX7 holes around the socket, the heatsink is not rightly attached

this translates in higher temps then normal

so..

the KX7 on the table, CPU running @ 45°C (room temp 23°C)
stable as hell, not 1 crash

moved it into a case , the case has 1 exchaust fan.. so I thought it was ok...

thought wrong, CPU temp soon hit 50+ & PC hung

opened the side panel & placed an extra 80mm FAN, loaded temps are now ~40°C

yesterday I came home to find the PC locked up.
I went to the case in "my other room ;)" I found that my mom had shoved the case right next my XP1800+ system, hereby cutting of access to free air..
moved the case back & system back up & running :)

I experienced this many times before, more with AMD system then with INTEL...
Of course there are expections (hey we live in a world of rules & 1000 expections) , so your experience @ 55°C is quite normal

but don't bullshit a bullshitter about CPU temps & crashing :)
leave you with pic of the case as it is now ->

mine never crashes at 51-55°C
yours probably crashes at socket temp 50° meaning 65 or more ° die temp :)

Afaik KX7 supports on-die temp reading... using Winbond HW monitor

IF cpu temp > 50°C = crash :)

grmbl

then how come I have 100% stability @ 55°C

mbm

my cpu rocks, yours doesn't :) ;)

I spend €75 on mine and it's only running 53mhz slower then yours ;p

in cost/mhz, your CPU is taken a HELL of a beating :spank:


+ learn to CROP for god's sake calantak (did it now for you, but next time it won't be for free ;) )

PaintShopPro = shareware + easy downloadable + easy useable (my father knows how to work with it...)

you win.
just ordered ten 1800+'s from funcomputer.
time to fold yer asses off, and kil ddtung in the process.

:^D

goal achieved, smiley has been added :grin:

maybe if you actually READ what I type ... ;)


:grin:

:super:

I dare you

show me the order for 10x 1800+ boxed + 10x asrock kt266a mobo's

I double dare you

I'll include a comparative review of 7 coolers and it's all on nforce2

that's a screenie of your wishlist ;p

I need confirmation baby :p

:)

:klap:

:)
wait til I live alone

we can go live together and have the biggest folding farm in Europe :love:

hello,

i want to know how far i can go with my 1800+ palomino @ 2000+
is he 39° idle
its twinmoss pc2700ramm

trial and error is the only way :)

unlock your CPU, that way you can find both the limit of the RAM & CPU

to find the limit of the CPU, raise the multiplier & up the FSB 1mhz at a time

to find the limit of the RAM, drop the multiplier & up the FSB 2-3mhz at a time

good luck

****,
kunde int nederlands zegge :p

em sta nu aan 1.75v en 43° aan 1.7ghz

that's already pretty high temperature

I have to keep my CPU temp <40°C to have my XP2200+ stable @ 2030Mhz with only 1.85v

if I put more through it (+2v) temp rises easily up to 50°C

ps: these forums are internationally aimed, therefore most of the threads you'll find here will be in english. it's a good learning school for dutch speaking people to improve their knowledge :)