Planning on overclocking and hardcore gameing, and showing off with my ownage case :D


totally :mad: :p


mm, where can i buy anti corrosive ? and sorry for asking but whats it for??? :S

i baught 3 Blue ccfls, to put in my Lian Li PC65 , and i'm going to order blue UV water for my h²o

ps: i had advice from The Dark Advenger , and he said that i better took the eheim1250 cause its got double flow, and is perfect for my 2x 120mm rad that im going to buy?

19w*18h (without fittings)with fittings it is 4cm extra
its 5cm in depth

anti corrosive usually serves two purposes: first its stops algae and other biostuff to grow in your watersystem and secondly if you have components of two different metals in contact with water (in your case aluminium and copper) it stops interaction (basicly they dissolve very slowly) between the metals.

You're probably reffering to UV reactive stuff. So the blue ccfl's won't be any good, you'll need UV ccfls for it to glow.

And finally you don't need a 1250 it's overkill. I can't find the link where they discuss the pump (its on the forum of aquacomputer.de) but recently there was a thread here too about the choice of pump. I have a similar setup as you do: maze3->DD chipset block->evo 240 (two fan rad) ->res1->res two -> 1048 and I have more than enough flow. Really on aquacomputer they even say a 1046 is enough. So with 1048 you will do fine. I think you won't reach beter temperatures with a 1250 you'll only have more noise.

One last thing you might want to use these:


They reduce the vibrations of the pump so your whole case isn't amplifying the noise of your pump's vibrations.

hmm still you didnt tell me where to buy those anti stuff
+ you didnt tell me where to buy those anti noise thingys :s

www.aquacomputer.de if you buy for 200€ or more delivery is free. So perhaps take the evo 240 (it's a good rad i've got one too). And save the delivery costs.

Artikel Menge Einzelpreis EUR Gesamtpreis EUR

--------------------------------------------------------------------------------

Einbaublende für airplex evo 240 18.99 18.99
Entfernen Aktualisieren
airplex evo 240 (Keine Anschlüsse) 49.99 49.99
Entfernen Aktualisieren
Ausgleichsbehaelter aquainject aus Aluminium, plugncool gerade 34.99 34.99
Entfernen Aktualisieren
Eheim 1048 45.49 45.49
Entfernen Aktualisieren
Anschluss-Satz plugncool fuer 1048 6.49 6.49
Entfernen Aktualisieren
Entkopplungsset fuer Pumpen 6.99 6.99
Entfernen Aktualisieren
Wärmeleitpaste Arctic Silver 3 6.99 6.99
Entfernen Aktualisieren
acfluid - Korrosionsschutz 4.49 4.49
Entfernen Aktualisieren
(m) PVC-Schlauch 12x1,5 1.79 7.16
Entfernen Aktualisieren
Lueftergitter 120 mm 1.99 3.98
Entfernen Aktualisieren
Papst Luefter 4412 F/2GL 3-Pin mit Tachosignal 22.95 45.90
Entfernen Aktualisieren



what bout that? :p

or need something more ?

Als ik me niet vergis heb je zowel zo'n metalen coverplaat voor over uw rad als 2 fingerguards voor uw 120mm's. Die finger guards zijn niet nodig. Want je gaat ze nergens kunnen steken. (Tenzij ze niet voor de twee fans van uw rad zijn.)

If you're still looking for one of the best commercial rads (if not the best): Thermochill 120.3

I've got it, but my cooling rig isn't mounted...

Eheim 1048 is enough for you....

sorry maar beste commerciële rad is zeker evo 1800.



plaats voor 15 120mm's :mad: :mad:

199€ (zonder fans):grin:

200€ is ni echt duur, als je weet wat een BIX kost :wtf: