Rad & Res & Pomp
 

Kga mij dus prolly een Wc aanschaffen, keb al keer Maze3 en eel den bitteklank gehad, ma kwil nu echt een megagoei, tis dus voor amd

als cpu blok ganek dus aan teus om et beste da hij kan maken, te maken :) aan 75€ zei em.

nu, het rad,reservoir en pomp, ksta dus voor een moeilijke keus, als rad haddek gedacht aan den HW Labs Black Ice Xtreme II Radiator 118€ @ loveno


12mm darmkes, ma dan moetek nog zien wa reservoir + pomp

eheim 1048 of 1250 ??


Help me out here :)

en raad gevraagd over radiator.. :hello: :ws: :mad:

as ge alleen cpu koelt is de 1048 goed genoeg...

rad is wel goed, ma raad u aan op nie daar te kopen

www.cosh.ag is een pak goedkoper

hmz en ask mobo ook wil koelen? tmoet echt eel goe gekoeld zijn :)


en daar zijn zoveel rads, dno which to choose :p

why no heatercore from the yunkyard? performs as good as that rad you say and costs 5-15€

my setup will consist of the following parts (finally got time to mod next week))
eheim 1250 , heatercore (opel astra/kadett) , cascade cpu blok , chipset dangerden full copper , klax graph-o-matic (till i find something beter) , dangerden res and tygon tubing.
i think that it will be a pretty high-end setup.

Teus his block will perform very well and an eheim 1048 is also very qualitive. it doesn't necessary have to cost serieus amounts of money to be good.

myeah, but really want the best tho :) still doubting about rad & pomp, and dnno what reservoir either.


Gimme some advice plzzzzzzz

look at that cosh site and tell me whats best, cause there are so many :P

quar: what are the dimensions of that heatcore?

Use a 1048, I cool both cpu and mobo, I have 2 reservoirs and an evo240 rad (size of two 120mm's). The 1048 has enough thrust. A 1250 wouldn't improve your cooling it would just sit there making more noise. ;)

about the rad: the black ice is a very good choice but I've heard a lot of good stuuf from auto rads (no experience myself) so for less than 15€ why not give it a shot. You'll have to see about te connectos though, a bit work there but hey, that shouldn't be a problem.

Oh, and about the res, the only thing to make shure off is the it doesn't create bubbles but removes them (heard something about tank o matic that needs the inner tubes to be cut). I think the res is most of the time a matter of looks (and price). Da Boka made a howto on making a plexi res. Check it out, it's quite good.

happy cooling

bout the rad: hmm what about the innovaRadi - Dual Fan Version SilentPower-Set at Cosh site, take a look at it


eheim 1048 it is!
Still looking for the reservoir :)

Ok what about this:

CPUBLOCK: TeuS Made Block :D
RESERVOIR: innovaTank-O-Matic Ausgleichsbehälter v1
RAD: Dual Fan Version SilentPower-Set
PUMP: Eheim 1048

And with 12mm slungs or whatever you name it :p

That's looking good. What are you planning to do with your water? It's always a good idea to put in some anti corrosive because I checked and your rad is made of aluminium (cpu block is copper) so that would make it complete I think. And while you're at it if you have a UV ccfl in your case take UV reactive anti corrosive.

greets and enjoy h2o

Planning on overclocking and hardcore gameing, and showing off with my ownage case :D


totally :mad: :p


mm, where can i buy anti corrosive ? and sorry for asking but whats it for??? :S

i baught 3 Blue ccfls, to put in my Lian Li PC65 , and i'm going to order blue UV water for my h²o

ps: i had advice from The Dark Advenger , and he said that i better took the eheim1250 cause its got double flow, and is perfect for my 2x 120mm rad that im going to buy?

19w*18h (without fittings)with fittings it is 4cm extra
its 5cm in depth

anti corrosive usually serves two purposes: first its stops algae and other biostuff to grow in your watersystem and secondly if you have components of two different metals in contact with water (in your case aluminium and copper) it stops interaction (basicly they dissolve very slowly) between the metals.

You're probably reffering to UV reactive stuff. So the blue ccfl's won't be any good, you'll need UV ccfls for it to glow.

And finally you don't need a 1250 it's overkill. I can't find the link where they discuss the pump (its on the forum of aquacomputer.de) but recently there was a thread here too about the choice of pump. I have a similar setup as you do: maze3->DD chipset block->evo 240 (two fan rad) ->res1->res two -> 1048 and I have more than enough flow. Really on aquacomputer they even say a 1046 is enough. So with 1048 you will do fine. I think you won't reach beter temperatures with a 1250 you'll only have more noise.

One last thing you might want to use these:


They reduce the vibrations of the pump so your whole case isn't amplifying the noise of your pump's vibrations.

hmm still you didnt tell me where to buy those anti stuff
+ you didnt tell me where to buy those anti noise thingys :s

www.aquacomputer.de if you buy for 200€ or more delivery is free. So perhaps take the evo 240 (it's a good rad i've got one too). And save the delivery costs.

Artikel Menge Einzelpreis EUR Gesamtpreis EUR

--------------------------------------------------------------------------------

Einbaublende für airplex evo 240 18.99 18.99
Entfernen Aktualisieren
airplex evo 240 (Keine Anschlüsse) 49.99 49.99
Entfernen Aktualisieren
Ausgleichsbehaelter aquainject aus Aluminium, plugncool gerade 34.99 34.99
Entfernen Aktualisieren
Eheim 1048 45.49 45.49
Entfernen Aktualisieren
Anschluss-Satz plugncool fuer 1048 6.49 6.49
Entfernen Aktualisieren
Entkopplungsset fuer Pumpen 6.99 6.99
Entfernen Aktualisieren
Wärmeleitpaste Arctic Silver 3 6.99 6.99
Entfernen Aktualisieren
acfluid - Korrosionsschutz 4.49 4.49
Entfernen Aktualisieren
(m) PVC-Schlauch 12x1,5 1.79 7.16
Entfernen Aktualisieren
Lueftergitter 120 mm 1.99 3.98
Entfernen Aktualisieren
Papst Luefter 4412 F/2GL 3-Pin mit Tachosignal 22.95 45.90
Entfernen Aktualisieren



what bout that? :p

or need something more ?

Als ik me niet vergis heb je zowel zo'n metalen coverplaat voor over uw rad als 2 fingerguards voor uw 120mm's. Die finger guards zijn niet nodig. Want je gaat ze nergens kunnen steken. (Tenzij ze niet voor de twee fans van uw rad zijn.)

If you're still looking for one of the best commercial rads (if not the best): Thermochill 120.3

I've got it, but my cooling rig isn't mounted...

Eheim 1048 is enough for you....

sorry maar beste commerciële rad is zeker evo 1800.



plaats voor 15 120mm's :mad: :mad:

199€ (zonder fans):grin:

200€ is ni echt duur, als je weet wat een BIX kost :wtf:

Actually, why bother with a side panel window. Just put in a side panel RAD.
Or good idea for the left side, since generally there isn't much to see there.

Ik denk da door de grootte van die rad ge toch een zeker verlies in druk zult hebben, dus zal em beter presteren, maar nie zoveel beter dan ge zou denken... Ik zie nergens een fanshroud... :D

Met een sterke pomp is die rad super. Die is ontwikkeld om clusters mee te koelen.

cpu: 128*opteron 144 :gay:
cooling: h2o cluster cooling :D