| Thread Tools |
4th November 2008, 22:23 | #1 |
[M] Reviewer Join Date: Nov 2004
Posts: 4,127
| Pentium 4 benchmarking Just got myself the ASUS P4C800-E mainboard for s478 benchmarking, available CPU's: P4 1.5GHz/256/400/1.75V P4 1.4GHz/512/400/1.3V DRAM of choice: Corsair XMS 3200LL (BH-5) Test setup: |
4th November 2008, 22:34 | #2 |
[M] Reviewer Join Date: Nov 2004
Posts: 4,127
| 1ste tests with P4 1400MHz: 2000MHz CPU-Z verified: http://valid.x86-secret.com/show_oc.php?id=442017 Problems I'm running into: - Multiplier is stuck to 12, while 14 is the default value. 12 is battery saving multiplier. - DRAM divider malfunctioning, can't set anything else then 3:4 at this moment which makes me run into maximum DRAM frequency pretty fast. - Board freezes randomly after VGA artifacts More to come the following days... Last edited by geoffrey : 4th November 2008 at 22:57. |
4th November 2008, 22:50 | #3 |
Madshrimp Join Date: May 2002 Location: 7090/Belgium
Posts: 79,021
| time to mount the single stage, mobo should be good for 250+Mhz FSB, reaching up and over 300Mhz if you can handle it
__________________ |
5th November 2008, 15:59 | #4 |
[M] Reviewer Join Date: Nov 2004
Posts: 4,127
| wish the memory divider would co-op with me for that :s |
5th November 2008, 16:03 | #5 |
[M] Reviewer Join Date: Nov 2004 Location: Waregem
Posts: 6,466
| Bios flash? |
6th November 2008, 12:34 | #6 |
Posts: n/a
| TCCD ram is maybe an option , slower timings but higher mhz. |
6th November 2008, 17:25 | #7 |
[M] Reviewer Join Date: Nov 2004
Posts: 4,127
| I'm not 100% sure but I think there is something wrong with the board as I'm getting VGA erros all the time. Tested 2 S3 PCI videocards in every PCI slot as we speak. |
6th November 2008, 19:51 | #8 |
[M] Reviewer Join Date: May 2002
Posts: 4,587
| For TCCD ram, you need to flash the bios : http://www.xtremesystems.org/forums/...highlight=TCCD |
7th November 2008, 10:50 | #9 |
Member Join Date: Apr 2005
Posts: 1,338
| if u need a other board : contact maximus on 9lives p4c800 he had i think still fully modded from back with dothan :P
__________________ http://www.hwbot.org/signature/u5776.png |
7th November 2008, 16:39 | #10 |
[M] Reviewer Join Date: Nov 2004
Posts: 4,127
| Got this board via him |
Thread Tools | |
| |