looks promising!

overkill is fun :D

i always want to give my case a personal touch, and thus i've cut something out of the frount bezel (my own design)
i used the same technique as in that howto i've wrote some time ago (knive, nail-file, etc.).

added some color:

started to install the tubing:
tygon (R-3603) 1/2" (12mm inside, 20mm outside)
and 15mm copper ellbows, just to be sure it wouldn't restrict waterflow too much.
pump is a Hydor L30 Compact Design 1200l/h.

had to improvise a bit, but it seems to be watertight

now i only have to find a 20mm bore to cut the final holes.
i have some time to go shopping tomorrow, so i geuss that it should be done by the end of the week.

in case anyone is wondering:
intake is 5* 80mm papst ngml @12V
outtake is 4* 120mm papst fgl @ 7V
WB is a slit edge thingie :):

didn't had the time to go shopping, so i fixed some fan filters.
don't want dust clogging up my rads.
i had to cut them up a bit to make them fit, doesn't look to bad me thinks.
i know that there are 2 diffirent kinds, but i got them really cheap, so you don't hear me complaining :)

forgot pic again :wtf: