It is maybe between -120 and -140° :D

Kick *** Thomas in Taipei !! And plz keep an eye on Massman...

lol should we lose him what then ??? :D.

kent ge het gezegde : je bent wild en je jongt wat, ik wil gewoon massman tegen zen eigen beschermen :p Nooit de poes bij de melk zetten :)

is da nie je bent jong en je wilt wat :p.

Higher scores :)

SuperPi 1M: 8.454
E8600 @ 5550MHz
http://www.hwbot.org/result.do?resultId=859355

3DMark01: 99423
GTX 285 @ Stock: 775-1475-1596
E8600 @ 5310MHz
http://www.hwbot.org/result.do?resultId=859356

Lowering the multiplier, I had a FSB up to 570MHz, couln't get higher. Check http://valid.canardpc.com/show_oc.php?id=577737
Raised the multi back to 10x, but even at 1.8V, the CPU can't get over 5.55GHz SPi1M-stable, and I have tried about every setting :/

Nice score mate. No way you can get it over 550FSB with a lower multi ( tried memtesting it ? )

Ya card clocks awesome :p very nice (pencil mod ?)

I have reached FSB of 570MHz with that lower multiplier. I didn't try memtest, as the main purpose is to have it SuperPi 1M-stable...
My settings: http://www.johanlemaire.be/OC/E8600/...20Settings.JPG
Generally, these readouts are the same as set in the BIOS, except the CPU Ref, CPU Ref2 and MCH Ref. I had those at 0.78, 0.836 and 0.796 respectively in the BIOS. But I tried lower and higher values, to no avail :(

Yes, pencilmod. But if I raise the shaderclock too much, I have to keep lower gpu and memory-clocks, with lower performance.

Which Pl is that on Johan ?

I would give 1.36NB voltage, MCH reference around 0.74 a shot, works fine on my EP45 UD3P till 580FSB... I have noticed on the Rampage extreme if I can\'t pass that memtest 7 test, that 3druns would be pretty hard to do... P45 remains a very sensitive chipset regarding volts...

Here\'s the run we did with Blind for the GOOC qualifiers

[IMG]http://s3.photobucket.com/albums/y90/blind_ripper/?action=view&current=Clipboard02.jpg[/IMG]

I had issues with benching 3D over 5.6Ghz due to heat, maybe that\'s ya issue too