remove check from the option "Automatically parse URLs: automatically adds [ url ] and [ /url ] around internet addresses"

and put [ url ] before and [ /url ] after each link to the picture, without the spaces of course :)

Did'nt work , the forumscript puts dividers in the link if it's to long (%20% ) , but no worry's , i've put them on an other site .
pic1
pic2
pic3
pic4

very nice cutout, like the handwriting style on the H

Thx , is a bit stolen from coca-cola ;-)

UBER Tower
 

This is my almost completed tower.

Some photos showing how it has worked out.
there was enough sunlight coming in to make the case turn red for the camera.

Also the top blowhole window and the rear mesh

If I was doing this over again, I would have not used 4 fans for the radiator.

I really do not like the power supply at all.

I may still change that. I may also swap the radiator around with in inlet/outlets to the rear.

Having the inlets in the front took an extra bay.

Having 4 fans also took too many bays.















FULL IMAGE LINKS
http://www.moddedcomputers.com/mod/w..._isfarenuf.jpg
http://www.moddedcomputers.com/mod/worklog/rearview.jpg
http://www.moddedcomputers.com/mod/worklog/topview.jpg
http://www.moddedcomputers.com/mod/w.../rightside.jpg
http://www.moddedcomputers.com/image...w_monster2.jpg
http://www.moddedcomputers.com/mod/worklog/almost5.jpg
http://www.moddedcomputers.com/mod/worklog/almost3.jpg
http://www.moddedcomputers.com/mod/w..._frontview.jpg

nicely done!

Thank you.

I planned the case with cad (micrografx) and tried to think though every detail. Even then, I ran into things that did not work like I planned. Towards the end, I really got tired of painting. At some point, I'll re-do the entire project.

http://www.madshrimps.be/forums/show...threadid=10463

Should have posted these here. Very nice rigs guys, and I hope you enjoy mine.

JoniNItro you're right, your system deserves a spot in here:)

most people don't like mine :(
I do have to admit the top comes up way too extreme, looking to change it and have a special thought about the sideplate. Cools great though: 3 rads, 2 pumps,...
anyway; please try and be polite because I had a lot of problems when I posted a picture at "another site".

don't listen to those people, I like the top very much, just the alu thing on the front fan is :wtf: Make it black ;)

thx for the reply kr15t0f.
The front fan is indeed gotta go. Think I'll place low profile black papst like in the beginning, was much cleaner that way.

Hey Dent:
I think that it looks killer man. Most people that dont mod just dont understand. I was thinking last night it would be cool to have to loops. A CPU one and a Northbridge/GPU. Well, I like you system looks like you spent a lot of time and effort on it.

yeah idd looks cool.
the 2 reservoirs in spec.
idd 2 loops will increase the performance.
keep it nice and cool ;)

Damn I hate my chieftech silver case.

Corrandy, I love the case.
I know a lot of people (@B2OC i guess :)) gave some poor comment on your case, but people who like it are prolly to laizy to post some comment (erm... hih :rolleyes: )
The drawing on the sidepanel is indeed a bit... strange?:rolleyes:

The is no pc like a pc with an overkill @ cooling...

Working on my second 3x120mm rad :grin:
Had a little to much pressure with a second pump though, but maybe I'll find a solution for that... ( homemade res kinda... exploded :p)
there is some topic over here... somewhere with some pics of my homemade cooling... and I mean HOMEMADE... right jmke?:D

(offtopic: jmke, I took some pics to make some sort of review, but the pictures didn't turn out that good, so still no good pics of cooling project, sry :rolleyes: )

I'll try to lay my hands on a digicam from a friend or something, and then I'll post some pictures of mine too... (and try to make a review :) )
:D

thanx all!!!!

@Da_Priest; I overlooked your project at [M], but I'm sure I saw it already somewhere before.
I did find it impressive (otherwise I wouldn't have remembered it).
Wasn't it posted at an English shop-forum or Xtreme systems?
and lol what pumps did you use, and did you put them in series or parallel??
@JoniNItro: loved the case! (both topics:o )
@Jort: damn, love the case, that's real modding!

Actually, I would not know :p
Prolly on Born2OC and here @ Da_Priest's HomeMade H²O-Cooling Project

thanks, trying to do my best :super:

good luck with your case:super:

cool desk =pp

can u connect it to ur car to locate deffects ? :o

lol

don't you see that usb port on the car :^D

Thank you. Perhaps the others didn't know what you were referring to. Yes, there is diagnostic software installed. The name of the computer is "Functional Design" because it is not just beautiful, but fully functional. It was also featured in the Oct. 2003 issue of CPU Magazine.

Erm... I was using 2 'aquarium'-pumps in series...
they're 1000l/h pumps with a head of 1.4m I think.
Pretty cheap... they're from "ORCA" hahahahaa :super:

The res was made of PolyStyreen and silicone, and it kinda blew a joint :rolleyes:
Next time I'll work with some epoxy or "plamuur"

have you ever tried running it with just one pump? A few weeks ago one of my eheims started leaking and as a temporary solution I just ran it with one pump. I didn't see any gain or decrease in heat!!! And that's with: three waterblocks, three reservoirs and three radiators. This tells me pressure really isn't so important when using "american-style" waterblocks (dangerden, swiftech, cathar,...) it might be more important with german waterblocks, I don't know.

Anyway, try running it with one pump if you ever get the chance, because pumps really do put a fair amount of heat in a loop.
My mcp650 just came in today, gonna spend the weekend drastically changing the watercooling (the whole top comes off). I hope I'll see a loss in temp at the end of the road :D

tbh, I never ran a dual pump setup :p
it was my first try and the res exploded :)

I was just trying to see if they made a difference

Anyways, just got the idea today to use some 'plamuur' on them and mod them to non-submerged pumps. And because of my dual connection setup I'll have to use them both in parallell.
I'll see what the extra flow gives me... My block is based on high flow so...


maybe we should start posting in some other topic, because this one is supposed to be 'casemodding :o '



grtz

is that a Delta 120mm blowing down on the test rig? :)

i use 3 delta 120 mm HP extra in extreme bench ;)

and you are in the next room I hope? or is that picture in your avatar your expression when turning on the PC? ;)

the picture shows i am MAD 2
think i fit the madshrimp profill :)

it's my benching rig, other systems i use water, vapochill and air
actually i have replaced the nventiv fans with better deltaas ;)

omg..
 

omg this aint mine but this is so beyond sweett
:ws: :ws: :ws: (drool)

Shoot a photo of the top. Looks like you did a good jog on the shroud and tanks. I almost put my radiator on top when I built THING. More photos, more photos.

~Mike~ www.moddedcompurers.com

Here is the case i'm working on
 

Here is the case i'm working on its have lot of work to go

Top Loading ATX case

Hey all!

Here is my case:





If you want to see more pictures you can look here:
www.GoTweak.dk/link.htm
There you can also find a worklog!

Oh my God...
lovely, no more words.....

man, that f*cking sweet :mad: :ws:

Don't you have some pictures of the making of?

omg!!!drooling at the top level :o :o :o :o :o

Thank you!

I have a worklog here:
www.GoTweak.dk/link1.htm

And if you want more pictures of the finished result just look here;):
www.GoTweak.dk/link2.htm