easypanic's 7300GT
 

Well, it started with a bummer.

It seems of my Syncmac Express PC800 sticks is borked :rolleyes: :bash:.

Hardware:

Celeron D
ASUS P5K
Ram ****
7300GT, duh.
Seagate 160GB SATA
ASUS air cooling

Our new Easyripper :)

Hehehe , and it only just started :D

lol :D

first run!!!

NO LOD, NO overclocking on VGA, simple Celeron D (single channel :rolleyes:)

run at 1280x1024 4xAA?

if yes, my score is seriously bugged at <100

oops, normal config, damn :(

make a screenie of the full detail shot as in BLINDs post

Seems like some people are forgetting the 4AA part :-)

And the higher resolution :D

CPU => zero effect

:excellent:

This Celeron 331 is not too good for benching with P5K :D.

Lowest FSB setting: 200MHz => 200*20 => 4 Ghz :D.
It goes with 1.6V :D.

WR is 4890 Mhz, I could take care of that :D.

lol, a celeron 331 with a p5k... your mobo costs three times the processor. :D

hey EasP, disable AA;

What clocks?

540/750 something I think, I was just testing cpu stuff :)

Pfft, 640 core is highest on stock cooling :/ :(.

all cards are from the exact same batch, all serial numbers are successive, first ends in xxx01, last in xxx20 , it's really just draw from the hat this contest

Is the setup mounted in a case? What drivers are you using?

93.71 , no case :D

45°C :/

Hm, try the 94.24, just to make sure it's not a driver problem.

http://www.nvidia.com/object/winxp_2k_94.24.html

If you're getting the same overclock, you just have bad luck, I guess. On the other hand ... the temps are not high, so voltmods will be no problem with this card :)

No difference :(.

3dMark 01 refuses to work now :(.

Could someone test the difference between single and dual channel setups?

I'm kinda stuck with only one DDR2 stick :(.

It'll be little to no difference, I think :)

1 FPS difference could mean nr 2 :D

I'll test it for ya tomorrow, but if +600Mhz cpu doesn't help, then I'm pretty sure dual channel won't help

:ws::woot::naughty::thump::drink::*:excellent:



:thanks:

Hmm, dual channel gives me about 0.6 fps more, but I'm not sure whether this is just coincidence or not :)

Easyripper took control of me again!!!

No more boot with P5K :(. As soon as I plug in the 4-pin 12V on the mobo, it makes a short circuit.....

I used it for two days damned...

:rolleyes::chop::whip::whip::whip:

Sure it's dead?

I have such problems with my DFI all the time. Today my rig suddenly shut down ... it took my a few hours to find out that the only thing I had to do was dismantle the system and wait a few minutes.

Changed PSU, doesn't short circuit as long as that damn 4-pin connector isn't plugged in .

bummer, we lost one contender.
Grr, did you use phase or something, maybe condensation that has to dry out ?

No, only switched from Celeron cpu to Conroe cpu :(.

Air cooled, no other mods.


Still have my ASUS P5N-32E SLI PLUS to play, but I'll be very carefull....
And a P5PL-2 and a NLV (merom) motherboard, but they won't be powerfull.

Bummer indeed, sorry about that Easyripper thing :p

CPU power doesn't matter :)

Indeed, but those boards don't have large BIOS settings...

:whip: myself :whip:


:shrug: Apparently I was able to bend some pins from the cpu socket holder. :-/

Straightened them and the old trusty Celeron 331 came back to life :ws: :woot: .

when you chose your nickname several years ago, you sure made no error:)

Hehe; I got it from real life.

Well; odd things still going on. The Syncmax stick that was not able to boot suddenly acts again, strange thing is that dual channel sometimes does not boot. Separate sticks booting is no problem, tomorrow I will do a Memtest.