own made phase-change project - Page 2

jort · 25th June 2004, 16:42

your'e kidding right daim
what da you mean by p4 HSF
does it destroy a procc to?

jmke · 25th June 2004, 16:44

imean remof the mob and cleanitout
so that you'v fres start,
then pick aP4HSF becuas titleof
thred is "phase-change" youknow.

sorry, couldn't resist :- )

jort · 25th June 2004, 16:56

i removed a bit an hour ago
and it boot for 3 sec and shut down.so i have to clean it all the way. pff
then pick aP4HSF becuas titleof i dont know where you talking about.say it in dutch please?

25th June 2004, 17:08

Put a Pentium4 heatsink on your CPU because the title of the thread is "phase change". I think.
Is the "CPUfan failure power off" setting turned on ? If so, try it again with a fan connected to the CPU_fan header.

jort · 25th June 2004, 17:14

ah i did thay already
fan is on it
i will cleen it tonight

thank you guys for the info.

jort · 25th June 2004, 22:20

Quote:

Originally posted by jort
ah i did thay already
fan is on it
i will cleen it tonight

thank you guys for the info.

my mobo came back to life
i cleaned it with isopropane or something
and a teathcleaner

jmke i ow you one

jmke · 25th June 2004, 22:24

probably a bad contact somewhere on the board, glad to hear it's back up and running

jort · 25th June 2004, 22:26

this is my theorie.
due the silicone on some components
and a high frenquent it maybe transfor to a capacitor or something else.
i can be wrong

jort · 8th July 2004, 20:47

i power-up my phase-change for a test, with peltier on it(56 w)
not on my cpu but if everything goes well with the insulation it will be tested on cpu next week
i let you know the results in an hour

jort · 8th July 2004, 21:19

i have and evap temp of -32° on 0% of load
with my pelt on it its -26° and when i tested on school with 2 peltiers i've got a coldplatetemp of -20°
so my cpu is going about -22° i think
because the peltiers are together 112 watt and my cpu standard is 74.12w calculated on http://www.benchtest.com/calc.html
and on 3.2ghz and 1.6v its 115 watt so about that
hope my mobo will do that to because i don't have a divider
msi 865 p neo

25th June 2004, 16:42	#11
jort Member Join Date: Jun 2004 Location: mechelen(belgium) Posts: 2,037	your'e kidding right daim what da you mean by p4 HSF does it destroy a procc to? __________________ watercooling, chilled water,direct phase change, cascade, custom modding

25th June 2004, 16:44	#12
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	imean remof the mob and cleanitout so that you'v fres start, then pick aP4HSF becuas titleof thred is "phase-change" youknow. sorry, couldn't resist :- ) __________________

25th June 2004, 16:56	#13
jort Member Join Date: Jun 2004 Location: mechelen(belgium) Posts: 2,037	i removed a bit an hour ago and it boot for 3 sec and shut down.so i have to clean it all the way. pff then pick aP4HSF becuas titleof i dont know where you talking about.say it in dutch please? __________________ watercooling, chilled water,direct phase change, cascade, custom modding

25th June 2004, 17:14	#15
jort Member Join Date: Jun 2004 Location: mechelen(belgium) Posts: 2,037	ah i did thay already fan is on it i will cleen it tonight thank you guys for the info. __________________ watercooling, chilled water,direct phase change, cascade, custom modding

25th June 2004, 22:24	#17
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	probably a bad contact somewhere on the board, glad to hear it's back up and running __________________

25th June 2004, 17:08	#14
wutske Posts: n/a	Put a Pentium4 heatsink on your CPU because the title of the thread is "phase change". I think. Is the "CPUfan failure power off" setting turned on ? If so, try it again with a fan connected to the CPU_fan header.

25th June 2004, 22:26	#18
jort Member Join Date: Jun 2004 Location: mechelen(belgium) Posts: 2,037	this is my theorie. due the silicone on some components and a high frenquent it maybe transfor to a capacitor or something else. i can be wrong __________________ watercooling, chilled water,direct phase change, cascade, custom modding

8th July 2004, 20:47	#19
jort Member Join Date: Jun 2004 Location: mechelen(belgium) Posts: 2,037	i power-up my phase-change for a test, with peltier on it(56 w) not on my cpu but if everything goes well with the insulation it will be tested on cpu next week i let you know the results in an hour __________________ watercooling, chilled water,direct phase change, cascade, custom modding

8th July 2004, 21:19	#20
jort Member Join Date: Jun 2004 Location: mechelen(belgium) Posts: 2,037	i have and evap temp of -32° on 0% of load with my pelt on it its -26° and when i tested on school with 2 peltiers i've got a coldplatetemp of -20° so my cpu is going about -22° i think because the peltiers are together 112 watt and my cpu standard is 74.12w calculated on http://www.benchtest.com/calc.html and on 3.2ghz and 1.6v its 115 watt so about that hope my mobo will do that to because i don't have a divider msi 865 p neo __________________ watercooling, chilled water,direct phase change, cascade, custom modding

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Numonyx reveals Phase Change Memory [PCM] devices	jmke	WebNews	0	23rd April 2010 12:46
Phase change memory is another step closer	jmke	WebNews	0	2nd November 2009 12:41
OCZ Cryo-Z Phase Change Cooler Tested	jmke	WebNews	0	10th March 2008 10:39
Homemade phase change project [NL]	jorain	Hardware Overclocking and Case Modding	75	8th April 2007 02:24
Budget minded phase change - benchinstall	piotke	Mad Bargains	0	16th July 2006 21:51
Build your own Phase Change Cooling	jmke	WebNews	0	22nd May 2006 10:09
Experiments with phase change cooling on GPU Memory	jmke	WebNews	0	24th March 2006 10:19
Groepsaankoop Phase Change Cooling	thorgal	Mad Bargains	0	5th September 2005 09:15
Prometeia Mach II GT Phase Change Cooler Review	jmke	WebNews	0	17th May 2005 20:53
phase change <--> cascade phase change?	kristos	General Madness - System Building Advice	20	2nd March 2004 09:30