It appears you have not yet registered with our community. To register please click here...

 
Go Back [M] > Hardware Madness > Air - Water - Peltier - Phase Change - LN2 Cooling Projects
demineralized water for liquid cooling demineralized water for liquid cooling
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read


demineralized water for liquid cooling
Closed Thread
 
Thread Tools
Old 17th August 2006, 04:14   #1
mentalcrisis00
 
Posts: n/a
Default demineralized water for liquid cooling

Just got a swiftech pump, radiator and apogee cooling setup for my gaming rig, i also got the swiftech hydrx liquid additive because i figured it'd be best to get the additive that recommended for the pump and such.

It says to get "demineralized water" now i've heard of mineral water but where do i find demineralized water? I don't have a filtration system for my tap so can i buy it someplace? Has anybody used the hydrx additive? any suggestions?

thanks

-Ray
 
Old 17th August 2006, 09:15   #2
wutske
 
Posts: n/a
Default

You can get it in most supermarkets.
 
Old 18th August 2006, 11:04   #3
Kougar
 
Posts: n/a
Default

Sounds like just a fancy name for distilled water?
 
Old 18th August 2006, 11:38   #4
Madshrimp
 
jmke's Avatar
 
Join Date: May 2002
Location: 7090/Belgium
Posts: 78,739
jmke has disabled reputation
Default

http://answers.google.com/answers/threadview?id=210005
__________________
jmke is offline  
Old 18th August 2006, 19:01   #5
Zwaplat
 
Posts: n/a
Default

There is a difference between demineralized and distilled. Demineralizing happens with a kind of chromatography, where + and - ions (K+, Na+, Cl-,...) get exchanged for H+ and OH- respectively. This way, you get water that doesn't conduct electricity (in theory), and should only react like water theoretically does. Mind you, it's impossible to get every ion out of water, so practically, it's not 'pure' water. Also, there probably are microorganisms left in this kind of water, even though there are no ions in it anymore. This might not be very nice in a watercooling.

Distilling means you evaporate the water, leaving behind anything that isn't H2O, and then condensing the vapour again. This also doesn't produce 100% pure water, but comes close.
 
Old 18th August 2006, 20:02   #6
Kougar
 
Posts: n/a
Default

Well I stand corrected!

Err, so he wouldn't want distilled and de-mineralized, as much as de-ionized water then?

That's an interesting link, Jmke. Who knew water was so complicated...
 
Old 18th August 2006, 20:11   #7
mentalcrisis00
 
Posts: n/a
Default

From what i've heard from the other forums and people i've talked to, the fully de-ionized stuff from chemistry shops and labs is really the best thing to have but is also expensive.

The next best thing is distilled water, which is for the most part non conductive and non corrosive. That can be bought at walmart or drug stores for like a dollar a gallon, and that is what almost everybody uses along with the liquid additive.

Really the best thing would be the premixed stuff from a company that makes liquid cooling equipment for computer technology. Unfortunatly that stuff is 30 bucks for every half gallon or less.

So i'm sure i'm gonna go with the distilled water and swiftech hydrx additive seeming it's the cheapest and most accessable. I'm not to worried about leaks because the swiftech stuff has a pretty good track record in that regard.

thanks all
 
Old 5th October 2006, 14:58   #8
Liquid3D
 
Posts: n/a
Default

All you need is a $1 per gallon of distilled water, that's the whole point of the "additive." They provide the addtive to combat iomnization.

basically distilled water is as stated above, boiled to remove impuritues. Impurities are what makes water electrically conductivce or ionoized.

If you have two "dissimilair" metals in a water-cooling system and you ususally do, there is the potential for Dissimilar or Galvanic Corrosion. Aluminum is probably the most probelmatic of metals when in "mixed company" because it corrodes so rapidly.

As the particles (ions) staurate the water in your cooling system this begins to effect how well it can transfer heat and if there's a spill that water is now electrically conductive which will cuase a short and fry components.

Switech adds ethelyne glycol and a few otrher additives to the solution tp prevent these things. Don't worry amnd just get distilled, if the label reads "Steam Distilled" that's better.
 
Old 16th October 2006, 14:31   #9
WeldZilla
 
Posts: n/a
Default

Dissimilar metals are really the biggest problem I have seen with people's cooling systems. I do not care what anti-freeze or corrosion inhibitor you use your liquid will beging to get cloudy much sooner than it should and your cooling system's effectiveness will also start to fade as the cloud begins to build up on your block. Distilled water is great, the price is right some protection to it and you are set. Use a copper water block and the rest platic or ceramic. So the only metal you have is the water block.

I have been liquid cooling for 5 1/2 years now without any problems!

WZ
 
Old 17th April 2007, 01:55   #10
Milos
 
Posts: n/a
Icon1

I have been using de-mineralized water and Swiftech Hydrx in the correct ratio for about 2 months and the liquid is still as clear as day one. I had an incident a few weeks ago when the graphics started getting all weird on the screen even in the BIOS. I turned it off and looked inside. Everything looked fine except there was some green droplets on the back of the graphics card (Asus N6600). The fittings on the chipset water block were not tightened all the way and it slowly leaked. I tightened those up and removed the video card, cleaned it with rubbing alcohol and reinstalled it. No more problems with either graphics or the leaks. The coolant was slightly conductive but not enough to make permanent damage.
 
Closed Thread


Similar Threads
Thread Thread Starter Forum Replies Last Post
Guide To Water Cooling Made Easy jmke WebNews 0 31st October 2008 15:41
Zalman Reserator 2 Water Cooling System jmke WebNews 3 20th February 2007 13:44
Preventing Microbial Growth in Water Cooling Systems Zwaplat WebNews 3 26th December 2006 14:24
Corsair Launches Nautilus GPU Water Cooling Blocks jmke WebNews 0 11th October 2006 21:49
Corsair Nautilus500 Water Cooling System jmke WebNews 1 28th April 2006 11:31
Vantec Stingray All-In-One Water Cooling Kit Sidney WebNews 0 10th October 2005 19:54
Water block fun: demonRed, the DIY water cooling setup jmke Articles & Howto's 12 9th July 2005 20:44
Global WIN introduces "Jefi": universal water cooling solution for up to 300W jmke WebNews 0 3rd June 2004 13:28
3R System Poseidon WCL-03 Water Cooling Kit @ ExtremeMHz jmke WebNews 0 31st May 2004 17:14
Popularity of water cooling skyrocketing? septimus Air - Water - Peltier - Phase Change - LN2 Cooling Projects 5 29th October 2002 17:05

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


All times are GMT +1. The time now is 14:56.


Powered by vBulletin® - Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO