Hand soldering BGA wafer chips

Stefan Mileschin · 4th July 2013, 07:04

And here we’ve been complaining about Flat Pack No-Lead chips when this guy is prototyping with Ball Grid Array in a Wafer-Level Chip Scale Package (WLCSP). Haven’t heard that acronym before? Neither had we. It means you get the silicon wafer without a plastic housing in order to save space in your design. Want to use that on a breadboard. You’re crazy!

Eh, that’s just a knee jerk reaction. The wafer-level isn’t that unorthodox as far as manufacturing goes. It’s something like chip on board electronics which have that black blob of epoxy sealing them after the connections are made. This image shows those connections which use magnet wire on a DIP breakout board. [Jason] used epoxy to glue the wafer down before grabbing his iron. It took 90 minutes to solder the nine connections, but his second attempt cut that process down to just 20. After a round of testing he used more epoxy to completely encase the chip and wires.

It works for parts with low pin-counts. But add one row/column and you’re talking about making sixteen perfect connections instead of just nine.

http://hackaday.com/2013/07/03/hand-...8Hack+a+Day%29

4th July 2013, 07:04	#1
Stefan Mileschin [M] Reviewer Join Date: May 2010 Location: Romania Posts: 148,597	Hand soldering BGA wafer chips And here we’ve been complaining about Flat Pack No-Lead chips when this guy is prototyping with Ball Grid Array in a Wafer-Level Chip Scale Package (WLCSP). Haven’t heard that acronym before? Neither had we. It means you get the silicon wafer without a plastic housing in order to save space in your design. Want to use that on a breadboard. You’re crazy! Eh, that’s just a knee jerk reaction. The wafer-level isn’t that unorthodox as far as manufacturing goes. It’s something like chip on board electronics which have that black blob of epoxy sealing them after the connections are made. This image shows those connections which use magnet wire on a DIP breakout board. [Jason] used epoxy to glue the wafer down before grabbing his iron. It took 90 minutes to solder the nine connections, but his second attempt cut that process down to just 20. After a round of testing he used more epoxy to completely encase the chip and wires. It works for parts with low pin-counts. But add one row/column and you’re talking about making sixteen perfect connections instead of just nine. http://hackaday.com/2013/07/03/hand-...8Hack+a+Day%29

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Reflow soldering improved with carbon dioxide	Stefan Mileschin	WebNews	0	30th May 2013 07:17
Vivo Xplay boasts 5.7-inch 1080p screen, dedicated audio chips and nifty single-hand	Stefan Mileschin	WebNews	0	8th May 2013 07:19
Build Your Own Soldering Station	jmke	WebNews	0	5th August 2008 12:43
NYC Soldering Championships	jmke	WebNews	0	17th July 2008 09:16
Hand-soldering teeny tiny chips	jmke	WebNews	0	4th June 2006 11:56
Laptop Gamers & LAN Parties Go Hand In Hand	jmke	WebNews	1	13th February 2006 15:07
Home Made Air Pencil Soldering Iron	jmke	WebNews	0	8th December 2005 11:12
ColdHeat Soldering Iron Review	Sidney	WebNews	0	25th October 2004 03:20
Soldering Guide	jmke	Articles & Howto's	41	29th September 2004 00:03
Soldering Guide	piotke	WebNews	1	1st March 2004 11:41