problem with MSI K7T Turbo Ver 3.0

9th October 2004, 20:45

I've got a MSI K7T Turbo Ver 3.0
but today I saw there was a lil problem on something i don't know in enligsh

some brouwn yelly thing is comming on it
picture : http://home.pi.be/~bellens1/tk/mb.jpg ( pic on your left side )

is it dangerous?

jmke · 9th October 2004, 20:59

are you talking about the capacitor (the tube thingie?)

9th October 2004, 21:19

Sidney · 9th October 2004, 21:35

Material Relative permittivity (dielectric constant)
================================================== ==========
Vacuum ------------------------- 1.0000
Air ---------------------------- 1.0006
PTFE, FEP ("Teflon") ----------- 2.0
Polypropylene ------------------ 2.20 to 2.28
ABS resin ---------------------- 2.4 to 3.2
Polystyrene -------------------- 2.45 to 4.0
Waxed paper -------------------- 2.5
Transformer oil ---------------- 2.5 to 4
Hard Rubber -------------------- 2.5 to 4.80
Wood (Oak) --------------------- 3.3
Silicones ---------------------- 3.4 to 4.3
Bakelite ----------------------- 3.5 to 6.0
Quartz, fused ------------------ 3.8
Wood (Maple) ------------------- 4.4
Glass -------------------------- 4.9 to 7.5
Castor oil --------------------- 5.0
Wood (Birch) ------------------- 5.2
Mica, muscovite ---------------- 5.0 to 8.7
Glass-bonded mica -------------- 6.3 to 9.3
Porcelain, Steatite ------------ 6.5
Alumina ------------------------ 8.0 to 10.0
Distilled water ---------------- 80.0
Barium-strontium-titanite ------ 7500

The yellow "stuff" is the dielectric materia used inside the capacitor (other than air type).

Look up here: http://www.ibiblio.org/obp/electricC.../DC/DC_13.html

jmke · 9th October 2004, 22:06

Quote:

Originally posted by lazyman

The yellow "stuff" is the dielectric materia used inside the capacitor (other than air type).

is it supposed to be on the outside? leakage?

Sidney · 9th October 2004, 22:18

Leakage from excessive heat.

9th October 2004, 22:29

known problem, abit used to have it a while back.
It used to be posted somewhere on this site.

9th October 2004, 20:45	#1
banana Posts: n/a	problem with MSI K7T Turbo Ver 3.0 I've got a MSI K7T Turbo Ver 3.0 but today I saw there was a lil problem on something i don't know in enligsh some brouwn yelly thing is comming on it picture : http://home.pi.be/~bellens1/tk/mb.jpg ( pic on your left side ) is it dangerous?

9th October 2004, 20:59	#2
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	are you talking about the capacitor (the tube thingie?) __________________

9th October 2004, 21:19	#3
banana Posts: n/a	yes

9th October 2004, 21:35	#4
Sidney Member Join Date: Mar 2004 Posts: 15,738	Material Relative permittivity (dielectric constant) ================================================== ========== Vacuum ------------------------- 1.0000 Air ---------------------------- 1.0006 PTFE, FEP ("Teflon") ----------- 2.0 Polypropylene ------------------ 2.20 to 2.28 ABS resin ---------------------- 2.4 to 3.2 Polystyrene -------------------- 2.45 to 4.0 Waxed paper -------------------- 2.5 Transformer oil ---------------- 2.5 to 4 Hard Rubber -------------------- 2.5 to 4.80 Wood (Oak) --------------------- 3.3 Silicones ---------------------- 3.4 to 4.3 Bakelite ----------------------- 3.5 to 6.0 Quartz, fused ------------------ 3.8 Wood (Maple) ------------------- 4.4 Glass -------------------------- 4.9 to 7.5 Castor oil --------------------- 5.0 Wood (Birch) ------------------- 5.2 Mica, muscovite ---------------- 5.0 to 8.7 Glass-bonded mica -------------- 6.3 to 9.3 Porcelain, Steatite ------------ 6.5 Alumina ------------------------ 8.0 to 10.0 Distilled water ---------------- 80.0 Barium-strontium-titanite ------ 7500 The yellow "stuff" is the dielectric materia used inside the capacitor (other than air type). Look up here: http://www.ibiblio.org/obp/electricC.../DC/DC_13.html __________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II

9th October 2004, 22:18	#6
Sidney Member Join Date: Mar 2004 Posts: 15,738	Leakage from excessive heat. __________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II

9th October 2004, 22:29	#7
FreeStyler Posts: n/a	known problem, abit used to have it a while back. It used to be posted somewhere on this site.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MSI P55-GD85 motherboard Launched With SATA 6.0Gbps And USB 3.0 Support	jmke	WebNews	0	19th January 2010 13:18
MSI playing it cool, no rush for USB 3.0 or SATA 6Gbps	jmke	WebNews	0	30th October 2009 15:30
MSI solves Nvidia GTX 200 squealing problem	jmke	WebNews	0	31st May 2009 12:28
MSI NX8600GT Twin Turbo Video Card	jmke	WebNews	0	28th January 2008 14:59
MSI NX8600GT Twin Turbo Shader Overclocking Geforce 8600GT	Sidney	WebNews	0	8th November 2007 01:12
MSI NX8600GT Twin Turbo - Choose your own mode!	jmke	WebNews	0	29th August 2007 14:57
MSI P35 Motherboard Series Launched	jmke	WebNews	0	4th June 2007 13:04
HOWTO: Troubleshoot Any Networking Problem	jmke	FAQ / INFO / HOW-TO	0	15th February 2006 13:33
confirmation of problem with msi neo2platinum	The Senile Doctor	Hardware/Software Problems, Bugs	6	8th January 2005 09:42
Turbo pll for msi k7t 266 pro2 & Vcore troubles	piotke	Hardware Overclocking and Case Modding	13	29th March 2003 18:09