I hear the Darth Vader theme everytime I see the Gemini altough the results are quite a dissapointment =O

So it's time you get the dual 140 heatsink from Thermalright.

why do you find the results for the GeminII a disappointment?

It is barely able to beat the Tuniq and the Ninia when using the second best fan on the market for noise performance. If you use 2 120s on the Ninia it will most likely annihilate it.

Hence, I assume that the fin or heatpipe design is flawed so Thermalright needs some better engineers as they simply are outclassed by Scythe and Tuniq.

Have they lost anyone in the past year so we have a Oskar Wu situation?


Can you get ahold of a pair of Silent Eagles? I'm sure Sharkoon would like their product to appear in more reviews, as it deserves it for being the best fan on the market.

GeminII is Coolermaster fyi it's build for high performance, so logically, that it will fall behind when used with slower CFM fans; the design is not meant for this.
Coolermaster has another new Tower heatsink coming with 120mm support which will maybe challenge the Ninja and others alike

Sharkoon fan-wise, I'm testing with the amount of fans standard provided, I started with the NCB, need to continue with that one, otherwise I can start from scratch

oops


The age of Tornados and Deltas is over since the XP-120 came out so it is pretty much pointless to optimize it for noisy fans, especially since the Tower heatsinks max out a CPU already if you use those noisy fans.

the idea behind the GeminII was to cool mosfets, chipsets, ram too, so I heard

Is there a possibility to test the Thermalright Ultra 120 (extreme or normal version) in the near future?
These seem to beat the Tuniq Tower and be very very silent (up to the point where one could use one without a fan on a non-oc'd E6600).

Just an idea of course

I tested it here: http://www.madshrimps.be/?action=getarticle&articID=496 while I'm sure it performs lovely with high speed fans, at low CFM the Ultra doesn't shine

If you like passive cooling, the Ninja is optimized for low speed fans or passive use with large fin spacing.

that's the benefit of the test setup used by madshrimps, it uses fans that would be considered quiet by the majority of users and that is what most people want today

Hey jmke,

First off, great job on the fan and heatsink reviews. Since you've had first-hand experience with them, I'm curious what your take is on why the CM Hyper Tx does so well, compared to say the Scythe Katana 2?

It looks like they both use a ~42 cfm fan / 3 heat-pipes and the Scythe appears to have more fins, which have more contact with each fin (oval slot, due to slanting vs round slot). I guess I was thinking that the Scyth would do better.

You think the difference is in the higher impedence of the Scythe? The way the heat-pipes are mounted at the base (the Tx seems better in that regard)?

I guess I'm just surprised at the Hyper Tx performance I'm seeing in reviews - a light-weight cooler, with push-pin mounting that out-performs all kinds of HSFs you wouldn't expect it to (maybe a bit loud at full load? but that's ok when there's a lot of gunfire and explosions going off ).

Oooh... do tell! . Show us a pic - we won't tell.

like the Arctic Cooling Freezer 64 (Pro) did then? can't put my finger on the exact reason why they do so good, but combination of custom fan which sends airflow over every part of the heatsink with help of a shroud at the top to further help cool things down certainly seems to off.

The new coolermaster 2*12 we saw at Cebit



more pics here: http://www.madshrimps.be/?action=get...&articID=5 50

Are those 38mm fans for more pressure?

Thanks, I must have missed that Cebit coverage before - I wish they'd moved to 8mm pipes on the Tx 2/3.

BTW, any chance of adding a Enzotech Ultra-X to your review lineup?

How about getting a preview sample of the Thermalright Ultima 90?