Integrated Audio

Realtek ALC897 / ALC662 / ALC888S Audio Codec

Two analog audio connectors (3.5 mm):

1) Line out (headphones)

2) Microphone input

Digital multi-channel audio output: via HDMI and DisplayPort

 

Card Reader

Integrated card reader

supports standard SD, SDHC and SDXC memory flashcards

Controller: Genesys GL9750 SD Host Controller

 

Wired Network

RJ45 connector supports Gigabit LAN at 10/100/1000 Mbit/s.

Intel i211 Ethernet Controller with MAC, PHY and PCIe interface

Supports Wake-on-LAN

 

LEDs and Buttons

Power button

Power LED (blue)

HDD LED (yellow)

 

Front Panel Connectors

2× USB 3.2 Gen 2 Type-A (red)

SD card reader

Audio line-out (headphones)

Microphone input

 

Back Panel Connectors

HDMI 2.0b digital video and audio output

DisplayPort 1.2 digital video and audio output

D-Sub/VGA analog video output (15-pin) - no hotplug

2× USB 3.2 Gen 1 Type-A (blue)

2× USB 2.0 Type A

Gigabit network (LAN, RJ45)

2× RS232 serial port, 9-pin D-Sub (support of an auxiliary voltage of 5/12 V,

the left port is switchable to RS422 / RS485)

DC input for the external power adapter

4-pin connector (2.54 mm pitch) supports

- external power on button

- Clear CMOS function

- +5V DC voltage for external components

2× perforation for optional Wireless LAN antennas

 

Other Onboard Connectors

Connectors COM1/COM2 for serial ports (occupied)

Jumper JP2 for power-on-after-power-fail (hardware solution)

USB 2.0 header (4-pin) required for WWN03 accessory

 

Power Supply

External 40 W AC/DC power adapter (fanless)

AC Input: 100 ~ 240 V AC, 50 ~ 60 Hz

DC Output: 19 V / 2.1 A

Automatic AC voltage adjust

 

Dimensions: ca. 95 × 42 × 29 mm (LWH)

DC cable length: ca. 170 cm

AC cable length: ca. 170 cm (with 2-pin Europlug)

DC Input connector

DC Connector: 5.5 / 2.5 mm (outer/inner diameter)

The DC-input of the computer supports an external power source

with either 12 V ±5% (max. 2.1 A) or 19 V ±5% (max. 3.33 A).

 

Supplied Accessories

Multi-language user guide (EN, DE, FR, ES, JP, KR, SC, TC)

VESA mount for 75 / 100 mm standard (two metal brackets)

Four screws M3 × 5 mm (screws together VESA mount and PC)

Four screws M4 × 10 mm (to affix VESA mount on the PC)

Four screws M3 × 4 mm (to mount a 2.5" storage into the bay)

Two screws M3 × 5 mm (to mount some M.2 cards)

Driver DVD (Windows 64-bit)

External 40 W power adapter with power cord (Europlug)

 

Optional Accessories:

- PS02: optional stand for vertical operation

- CXP01: adapter cable for the external power button

- PRM01: 2U/19" rack-mount front plate for two Shuttle XPC slim PCs

- DIR01: DIN-Rail mounting kit

- WLN-M. WLAN module in M.2-2230 format supports IEEE 802.11ac and Bluetooth 4.0 with two external antennas.

- WWN03: LTE kit with an adapter card, 2 antennas and antenna cables. Supports one M.2 LTE module and one nano SIM card