Fanless and silent

Completely fanless, virtually noiseless

Passive cooling through convective heat transfer

Perfect to be used in noise-sensitive environments

Fanless means less dust and thus virtually no maintenance is required

 

24/7 Nonstop Operation

This device is approved for 24/7 permanent operation.

Requirements:

- Free air circulation around the PC must be guaranteed.

- Ventilation holes must be kept clear.

- Any installed disk must also be approved for permanent operation by its manufacturer

 

Chassis

Slim PC with black chassis made of steel

Dimensions: 190 × 165 × 43 mm (LWH) = 1.35-litre

Weight: 0.8 kg net and 1.95 kg gross

Two holes for Kensington Lock and numerous

threaded holes (M3) at both sides of the chassis

 

Operation Position

1) Horizontal

2) Vertical with mounted feet.

These feet can be purchased as optional accessory PS02.

3) Vertical (e.g. VESA-mounted behind an appropriate monitor)

In the vertical position, the front USB ports should point upward.

Ventilation holes must not be blocked to ensure sufficient cooling.

 

Operation System

This system comes without an operating system.

It is compatible with

- Windows 10 (64-bit)

- Windows 11 (64-bit)

- Linux (64-bit)

 

Processor

Intel® Pentium® Silver Processor N6005, Quad-Core

CPU clock frequency: 2.0 GHz, max. Turbo frequency: 3.3 GHz

Code name: "Jasper Lake"

10 nm structure, FCBGA1338 package (soldered)

CPU cores / Threads: 4 / 4

L2 Cache: 4 MB

Thermal Design Power (TDP): 10 W

Supports x86-64, AES-NI, VT-x (EPT), VT-d, SSE4.2, AES

System-on-Chip processor (SoC) with integrated graphics processor, no chipset required

 

Integrated Graphics

The Graphics Processing Unit (GPU) is integrated into the processor

Intel® UHD Graphics (11th Gen), GPU frequency: 450~900 MHz

Supports DirectX 12, OpenGL 4.5, OpenCL 1.2, Intel Quick Sync Video, Intel Clear Video (HD)

Execution Units (EU): 32

 

Triple Display Support via three video outputs:

- HDMI 2.0b: max. 4096 × 2160 @ 60 Hz

- DisplayPort 1.4a: max. 4096 × 2160 @ 60 Hz

- D-Sub/VGA: max. 1920 × 1200 resolution @ 60 Hz

Supports two digital displays and one analog display simultaneously.

The D-Sub/VGA connector does not support the Hot Plug feature.

 

UEFI Firmware

16 MB Flash ROM with AMI's Aptio UEFI BIOS Firmware

Based on the Unified Extensible Firmware Interface (UEFI)

Supports Power fail resume / AC power on state / always-on / always-off

Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states

Supports boot up from external flash memory cards

With embedded Firmware TPM v2.0 (fTPM)

CMOS battery (type CR2032)

 

Memory Support

2× SO-DIMM slots with 260 pins

Supports DDR4-2933 (PC4-23466U) SDRAM at 1.2V

Supports Dual Channel mode

Supports max. 16 GB per DIMM

Maximum total size: 16 GB (either 1× 16 GB or 2× 8 GB)

Supports two unbuffered DIMM modules (no ECC)

 

2.5" Bay for Hard disk drive/SSD

Supports one drive in 6.35 cm / 2.5" format (hard disk or SSD)

Serial ATA III Interface with up to 600 MB/s transfer speed

Max. height 12.5 mm

Pre-installed SATA cable (data/power)

Supports Unified Extensible Firmware Interface (UEFI)

M.2 expansion slot for SSD card

M.2-2280 BM slot

Interfaces: PCI-Express Gen. 3.0 X2 and SATA v3.0 (max. 6 Gbit/s)

Supports M.2 cards with a width of 22 mm

and a length of 42, 60 or 80 mm (type 2242, 2260, 2280)

Supports SATA SSDs (BM-Key) or NVMe PCIe SSDs (M-Key)