Audio
Two analog audio connectors (3.5mm) on the front panel:
1) 2-channel line-out (head-phones)
2) microphone input
Digital multi-channel audio output: by HDMI and DisplayPort
Dual Gigabit LAN Controller
Dual network with two RJ45 ports with two status LEDs each
Used network chips:
2x Realtek RTL8111H Ethernet Controller (MAC, PHY)
PCIe interface
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
Supports Teaming mode [4]
Card Reader
Integrated card reader
Supports SD, SDHC and SDXC up to v3.01 memory flash cards
UHS-I interface supports up to 104 MB/s (SDR104) transfer speed
Realtek RTS5227S chip with PCIe chipset interface
Supports boot up from SD card.
Front Panel connectors
Microphone input
Audio Line-out (headphones)
4x USB 3.2 Gen 1 (max. 5 Gbps)
SD card reader
Power button
Power LED (blue)
HDD LED (yellow)
Back Panel connectors
1x HDMI 2.0 connector
2x DisplayPort 1.2 connector (DP)
Optional: 1x D-Sub VGA connector (Accessory PVG01)
2x USB 3.2 Gen 1 (max. 5 Gbps)
2x USB 2.0
2x Gigabit LAN (RJ45)
2x RS232 serial COM port, 9-pin D-Sub
1x DC-input connector for external power adapter
1x 4-pin connector (2.54 mm pitch) supports:
- external power on button
- Clear CMOS function
- +5V DC voltage for external components
2x perforation for optional Wireless LAN antennas
2x hole for Kensington Lock
Other onboard connectors
1x jumper for power-on-after-power-fail (hardware solution)
1x analog VGA graphics output CN3 (2x 10-pin, 1 mm pitch)
2x serial interface (COM) occupied by backpanel connectors
1x USB 2.0 (4-pin) for optional accessory WWN03 (LTE kit)
1x fan connector (4-pin) occupied by the cooling system
1x Debug header (reserved)
Supplied Accessories
Multi-language user guide (EN, DE, FR, ES, JP, KR, SC, TC)
VESA mount for 75/100 mm standard (two metal brackets)
Four screws M3 x 5 mm (screws together VESA mount and PC)
Four screws M4 x 10 mm (to affix VESA mount on the PC)
Four screws M3 x 4 mm (to mount a 2.5" storage device into the bay)
Two screws M3 x 5 mm (silver colour, to mount two M.2 cards)
Driver DVD (Windows 64-bit)
Serial ATA cable for 2.5" drive including power cable
External 120 W power adapter with power cord
Protection cap for CPU socket (do not use if heatpipe or fan is mounted)
Heatsink compound
Optional Accessories:
- PVG01: optional D-Sub VGA video output
- WLN-M. WLAN module in M.2-2230 format supports IEEE 802.11ac and Bluetooth 4.0 with two external antennas.
- WWN03: LTE adapter kit with antennas, but without LTE card
- PS02: Stand for vertical operation
- CXP01: adapter cable for external power button
- PRM01: 2U rack mount front plate for two Shuttle XPC slim PCs
- DIR01: DIN-Rail mounting kit
Environmental Specifications
Operating temperature range: 0~50 °C
Relative humidity, non-condensing: 10~90 %
Certifications / Compliance:
EMI: FCC, CE, BSMI, RCM, VCCI
Safety: ETL, CB, BSMI
Other: RoHS, Energy Star, ErP