- Back to homepage
- Related articles
  Related articles

Corsair Graphite Series 760T Full Tower Computer Case Review

Cases & PSU/Cases by stefan @ 2014-03-31

The latest 760T case from Corsair takes part of the Graphite series and features specially designed side panels which allow a full-view of the system during operation. The inside quite spacious and was built with both air and water cooling in mind. Thanks to the modular drive cages, we have multiple mounting possibilities and the integrated fan controller allows running in both Silent (7V) and Full Speed (12V) modes.

A Closer Look Part II

Not only the lateral covers feature magnets but also the top plastic cover; after its removal we will be able to see the fan/radiator mounting points which are also provided with rubber grommets:

Here is also a closer look of the previously mentioned plastic cover:

On the front, Corsair has made available three 5.25’’ bays, which are covered with some stylish covers:

Further down, we have a large filtered metallic grill:

Facing upwards we will be able to see a small Corsair logo:

On the top we have the headphones and microphone jack, one small fan controller button which switches between 7V and 12V, two USB 2.0 ports, two additional USB 3.0 ports, one Reset button but also one larger Power button; both Reset and Power buttons feature LED backlight:

The back side of the case is all-black and here we will be able to see the hole for the I/O Shield, the 140mm exhaust fan, 9 slot covers, two holes for water cooling but also the bottom PSU frame:

On the bottom side of the case we have one removable fan filter; in the middle we can also mount an additional 120mm fan:

No comments available.

All information and graphics contained in Madshrimps are sole property of the Madshrimps crew and may not be reproduced or copied in any manner without written permission from us.