Others/Miscelleneous by stefan @ 2013-05-16
For users on the go, ADATA has created a new multifunctional device which acts as a wireless AP, USB storage drive or card reader and as an extra it also functions as a power bank, to recharge the tablet/mobile phone when we need it most.
If we remove the protection, we will reveal one USB port used for charging the AE400, and a secondary USB port for connecting the devices we want to have charged and also storage devices. A Reset button hole is also available here:
The opposite side comes with a SD card reader:
By looking carefully in the indicator area, we will find (from left to right):
-Power/Charge Display Light
-USB/Card Reader indicator
-Power Bank Indicator
-Wireless Signal Indicator
The bottom side of the AE400 shows a sticker with a product serial number:
The operating modes can be switched by using the lower button, on the top surface:
When charging the product, we will see the battery LED indicator switching colors, until it will become green (which indicates a charge state between 50 and 100%):
The User Guide cover comes with a hint, that we must charge the Power Bank for about 8 hours before the first use:
The manual will also explain in detail the operating modes and how to configure the device wirelessly:
Copyright © 2001-2011 Madshrimps, All rights reserved.
Graphic Design by Dennis Kestelle, Programming by Maarten Menten,
Overall Site design by John Meys
All information and graphics contained in Madshrimps are sole property of the Madshrimps crew and may not be reproduced or copied in any manner without written permission from us.
Follow us on Twitter
Follow us on Facebook