Cooling/CPU Cooling by stefan @ 2010-12-08
The Super Mega CPU cooler is a revised version of the older Megahalems from Prolimatech, a hybrid of copper and aluminum. An extra set of spring screws is included to install extra pounds of pressure for an even tighter contact between the heatsink base and the CPU.
The testbench was composed from the following hardware:
CPU: Intel I5 Retail @ 3.2GHz & 4.0GHz
Motherboard: ASUS P7P55D-EVO Preliminary
RAM: G.Skill Ripjaws F3-12800CL8D-4GBRM
Video: ATI RADEON 4890 1GB with ThermalRight Custom Cooling
Power Supply: Cooler Master Real Power Pro 850W non-modular
HDD: Seagate Barracuda 320GB 7200.10
Case: Cooler Master ATCS 840
The testing procedure was the following:
- the system was left in IDLE for 30 minutes after the system booted up
- OCCT 3.1.0 was started with the following settings:
CPU:OCCT
Test Type: Custom -> 30 minutes
Test Mode: Small Data Set
Priority: Normal
After the test was complete, the system was left again alone for 30 minutes, for the temperatures to stabilize.
All the tests were performed inside a closed case, the Cooler Master ATCS 840 with all stock fans installed.
Copyright © 2001-2011 Madshrimps, All rights reserved.
Graphic Design by Dennis Kestelle, Programming by Maarten Menten,
Overall Site design by John Meys
All information and graphics contained in Madshrimps are sole property of the Madshrimps crew and may not be reproduced or copied in any manner without written permission from us.
Follow us on Twitter
Follow us on Facebook