Madshrimps Forum Madness

Madshrimps Forum Madness (https://www.madshrimps.be/vbulletin/)
-   Articles & Howto's (https://www.madshrimps.be/vbulletin/f6/)
-   -   ATI X1900 Series Overclocking Guide (https://www.madshrimps.be/vbulletin/f6/ati-x1900-series-overclocking-guide-23505/)

jmke 7th July 2006 20:03

no I don't think you can combine them unfortunately :(

PsyBorg 7th July 2006 20:36

Can you suggest a PSU that would work? I need at least 600W. -_- that PSU was new too...

jmke 7th July 2006 20:49

Quote:

Originally posted by Gamer

A Zippy 700 did the trick.
.

and Silverstone 700 also worked fine in tests; there are also high rated PC Power&Cooling models available...

as long as it has 30A+ on a single 12v line

Carni4 24th July 2006 16:54

Nice guide.

I was putting a rig together for a friend of mine (he fried his old P4 setup :D ) with a x1900xt card and an amd s939 3700+/4000+, 2gb pc4000 ram, 1 sataII HD.

We were thinking of an Antec Performance TX1050B case which has a Smartpower 500W PSU.

Will this be enough for stock speeds? No OC. Website says it only has 17A @ 12V line...

My guess is it wont work...

piotke 24th July 2006 17:05

Will work.

jmke 24th July 2006 17:26

will work, but not much for extra hardware

Rutar 24th July 2006 18:18

it has two 12V rails and 500W total, that should be enough for non CF/SLI systems


All times are GMT +1. The time now is 07:28.

Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO