Voltage Mod Radeon X800 Pro with Pencil @ VR-Zone
The card isn't even in the shop yet here.. but when you get your hands on one, you can directly turn up its speed with the help of a little more voltage through the core! Quote:
Locate the resistor as shown above and start to pencil it slowly, a few strokes should be sufficient to increase the VGPU from 1.31v to 1.4v. I have tried higher voltages but i have found that any voltage higher than 1.45V seems to be a little too much and the card will start artifacting during benching. Therefore i have left the VGPU at 1.4v which is pretty sufficient for air cooling.
| http://www.vr-zone.com/?i=817&s=1 | 