How to recover ATI Radeon HD 4870 from bad BIOS flash

jmke · 10th July 2008, 15:35

In the past all (consumer) graphics card BIOSes were smaller than 64 KBytes. With the introduction of GDDR5 additional space was required for the memory training code. Since ATI could not fit that piece of code into the 64 KB available, they increased the BIOS size to 128 KB (1 MBit).

For an unknown reason ATI's flashing software Winflash/Atiflash does not correctly detect those extra 64 KB and forgets to save them when you dump your BIOS to a file. The same happens to GPU-Z (fixed in 0.2.5 and newer). So everybody who extracted their HD 4870 BIOS ended up with no GDDR5 microcode.

http://www.techpowerup.com/articles/...ng/vidcard/152

10th July 2008, 15:43

Very important info here! Thank you.

jmke · 10th July 2008, 15:46

I know this will in handy for those looking to change the fan speed profile, you can change it to run faster at lower GPU temps, thereby keeping the card cooler and more OC friendly with stock cooling.

Also this will be useful for Blind once he gets his hands on HD4870

10th July 2008, 17:57

I've been considering getting one myself... if I do, then BIOS flashing will be the next thing I do to it after slapping a waterblock on it!

If Diamond can get these things to 900Mhz+, then I bet I could get close with H20 cooling.

10th July 2008, 15:35	#1
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	How to recover ATI Radeon HD 4870 from bad BIOS flash In the past all (consumer) graphics card BIOSes were smaller than 64 KBytes. With the introduction of GDDR5 additional space was required for the memory training code. Since ATI could not fit that piece of code into the 64 KB available, they increased the BIOS size to 128 KB (1 MBit). For an unknown reason ATI's flashing software Winflash/Atiflash does not correctly detect those extra 64 KB and forgets to save them when you dump your BIOS to a file. The same happens to GPU-Z (fixed in 0.2.5 and newer). So everybody who extracted their HD 4870 BIOS ended up with no GDDR5 microcode. http://www.techpowerup.com/articles/...ng/vidcard/152 __________________

10th July 2008, 15:46	#3
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	I know this will in handy for those looking to change the fan speed profile, you can change it to run faster at lower GPU temps, thereby keeping the card cooler and more OC friendly with stock cooling. Also this will be useful for Blind once he gets his hands on HD4870 __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sapphire's ATI Radeon HD 4870 1GB Toxic graphics card	jmke	WebNews	0	23rd February 2009 19:17
ATI Radeon BIOS Editor 1.19 released, adds voltage control for HD4870X2	jmke	WebNews	1	16th February 2009 17:09
AMD Reduces Pricing of ATI Radeon HD 4870 to $199	jmke	WebNews	0	6th December 2008 09:05
MSI R4870 T21G ATI Radeon HD 4870 1GB Review	jmke	WebNews	0	16th November 2008 22:49
AMD's ATI Radeon HD 4870 1GB	piotke	WebNews	0	6th October 2008 15:03
ATI Radeon HD 4870 X2 Vs. ATI Radeon HD 4870 CrossFire Review	jmke	WebNews	0	17th September 2008 14:53
ATI HD Radeon 4670 Official Reviews Released	jmke	WebNews	0	10th September 2008 10:05
ATI Radeon HD 4870 Overclocking Guide	jmke	WebNews	0	25th August 2008 10:57
Driver Heaven Mobility Modder.net Public Beta V 0.8.1.0 - XP and Vista Support	jmke	WebNews	0	22nd June 2007 11:19
RaBiT - Radeon ATI BIOS Tuner	jmke	WebNews	0	28th September 2004 15:55

10th July 2008, 15:43	#2
Kougar Posts: n/a	Very important info here! Thank you.

10th July 2008, 17:57	#4
Kougar Posts: n/a	I've been considering getting one myself... if I do, then BIOS flashing will be the next thing I do to it after slapping a waterblock on it! If Diamond can get these things to 900Mhz+, then I bet I could get close with H20 cooling.