problems with socket 939-a64 setup - Page 4

Gamer · 29th August 2004, 15:42

MBM5 still works fine.

The Senile Doctor · 29th August 2004, 15:50

what settings do I choose on a a8v deluxe?

I get 15.89 volts on the +12v of which bios says 11.92...

But the voltage thing is the most important for me...

Sidney · 29th August 2004, 22:43

Remove MBM completely and reinstall; hopefully your Motherboard will be showing up on the list. Two of my Asus P4 boards will give over 15V on 12v rail until I choose P4P800 from the table during install.

jmke · 29th August 2004, 22:54

or just go into Start -> Mbm5 folder and choose "config wizard"

Sidney · 29th August 2004, 23:02

It sounds much easier than my alternative.

The Senile Doctor · 30th August 2004, 10:44

my mobo is not on the list, that's the problem...

jmke · 30th August 2004, 10:54

change the sensor in the MBM5 config

isn't there monitoring soft on the Asus CD ? PC Probe or something like that

The Senile Doctor · 30th August 2004, 11:18

I've changed the probes on mbm, I'm no moron, I've been into mbm since 4-5 years, pre-wizard stage. simply doesn't turn out right
asus probe doesn't work with subzero temps.

1.55 volts was stable at 14*200. still saying at default ram for now,
I'll set it at 1.7 this weekend, and stay there, and look how high it can go this way, hoping for 15*200, if that works, I'll never touch it again until I replace it

if it doesn't, I'll stay at 14* and try upping fsb.

piotke · 30th August 2004, 11:25

14*200 = 2800 Mhz is really nice on that voltage

jmke · 30th August 2004, 11:32

Quote:

Originally posted by calantak

asus probe doesn't work with subzero temps.

disable temp monitoring, check the voltage lines...

29th August 2004, 15:42	#31
Gamer [M] Reviewer Join Date: May 2002 Posts: 4,587	MBM5 still works fine. __________________

29th August 2004, 15:50	#32
The Senile Doctor Member Join Date: May 2002 Location: wherever the doom is Posts: 3,171	what settings do I choose on a a8v deluxe? I get 15.89 volts on the +12v of which bios says 11.92... But the voltage thing is the most important for me... __________________ OC-2-the-death Where the Reverend is doing his Magick, all mortals be silent Doom over the world

29th August 2004, 22:43	#33
Sidney Member Join Date: Mar 2004 Posts: 15,738	Remove MBM completely and reinstall; hopefully your Motherboard will be showing up on the list. Two of my Asus P4 boards will give over 15V on 12v rail until I choose P4P800 from the table during install. __________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II

29th August 2004, 22:54	#34
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	or just go into Start -> Mbm5 folder and choose "config wizard" __________________

29th August 2004, 23:02	#35
Sidney Member Join Date: Mar 2004 Posts: 15,738	It sounds much easier than my alternative. __________________ lazyman Opteron 165 (2) @2.85 1.42 vcore AMD Stock HSF + Chill Vent II

30th August 2004, 10:44	#36
The Senile Doctor Member Join Date: May 2002 Location: wherever the doom is Posts: 3,171	my mobo is not on the list, that's the problem... __________________ OC-2-the-death Where the Reverend is doing his Magick, all mortals be silent Doom over the world

30th August 2004, 10:54	#37
jmke Madshrimp Join Date: May 2002 Location: 7090/Belgium Posts: 79,021	change the sensor in the MBM5 config isn't there monitoring soft on the Asus CD ? PC Probe or something like that __________________

30th August 2004, 11:18	#38
The Senile Doctor Member Join Date: May 2002 Location: wherever the doom is Posts: 3,171	I've changed the probes on mbm, I'm no moron, I've been into mbm since 4-5 years, pre-wizard stage. simply doesn't turn out right asus probe doesn't work with subzero temps. 1.55 volts was stable at 14200. still saying at default ram for now, I'll set it at 1.7 this weekend, and stay there, and look how high it can go this way, hoping for 15200, if that works, I'll never touch it again until I replace it if it doesn't, I'll stay at 14* and try upping fsb. __________________ OC-2-the-death Where the Reverend is doing his Magick, all mortals be silent Doom over the world

30th August 2004, 11:25	#39
piotke [M] Reviewer Join Date: Jun 2002 Posts: 5,003	14*200 = 2800 Mhz is really nice on that voltage __________________ .

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AMD Athlon 64 Socket AM2 CPU in a Socket 939 Motherboard	jmke	WebNews	0	13th October 2006 17:41
AMD Socket 754 to Outlast Socket 939	jmke	WebNews	0	31st March 2006 17:42
Mounting Socket 462 Coolers Onto Socket 939 Motherboards	Sidney	WebNews	0	19th February 2006 05:11
SFF Roundup, Socket 939 Systems	jmke	WebNews	0	11th August 2005 15:26
Ultra High Performance Memory Roundup A64 Socket 939	jmke	Articles & Howto's	35	14th June 2005 12:40
Socket 939 Motherboard Showdown	jmke	WebNews	0	21st September 2004 12:41
Socket 939 Roundup: Battle at the Top	jmke	WebNews	0	3rd August 2004 18:04
Socket 939 Roundup: Battle at the Top	jmke	WebNews	0	22nd July 2004 10:17
Socket 939 Battle – VIA vs. Nvidia	jmke	WebNews	0	16th June 2004 12:56
AMD to Stretch Transition to Socket 939	jmke	WebNews	3	25th March 2004 14:09