MBM5 still works fine.

what settings do I choose on a a8v deluxe? :)
I get 15.89 volts on the +12v of which bios says 11.92...

But the voltage thing is the most important for me...

Remove MBM completely and reinstall; hopefully your Motherboard will be showing up on the list. Two of my Asus P4 boards will give over 15V on 12v rail until I choose P4P800 from the table during install.

or just go into Start -> Mbm5 folder and choose "config wizard" :)

It sounds much easier than my alternative.;)

my mobo is not on the list, that's the problem...

change the sensor in the MBM5 config :)

isn't there monitoring soft on the Asus CD ? PC Probe or something like that

I've changed the probes on mbm, I'm no moron, I've been into mbm since 4-5 years, pre-wizard stage. simply doesn't turn out right
asus probe doesn't work with subzero temps.

1.55 volts was stable at 14*200. still saying at default ram for now,
I'll set it at 1.7 this weekend, and stay there, and look how high it can go this way, hoping for 15*200, if that works, I'll never touch it again until I replace it :)
if it doesn't, I'll stay at 14* and try upping fsb.

14*200 = 2800 Mhz is really nice on that voltage

disable temp monitoring, check the voltage lines... :hello: