Inside the room it was 31°C 1,70 V - 2,70 V ... temp: never above 45°C stressed (on seperate temp, onboard reader reports less) When i have the time i'll try the uberbios as i only have 3 fsb settings atm: 133-166-200 Lotsa noise ofcourse :D |
room temps were very high, 2.4ghz is impressive in those conditions =) |
true ! |
let's try that also :) slk800+ papst @ 3000 rpm.... roomtemp 34° C Was dat enkel booten of 100% prime stabiel ? ik veronderstel enkel booten ? |
FYI 2360 Mhz on 1.72 Vcore, only booting.... 54° idle :) |
hehe do not forget this is a very cheap setup xp1700 + asus a7n8x-x + 2 x 256 twinmos 3700 = 290 EUR barton xp 3200 (2200 mhz) = 355 eur (not boxed) rig = rockstable at 2200 mhz (has been folding gromacs 24/7 since monday) ... in this heat ... 50°C stressed (on seperate reader - on board = 44°C :wtf: ) ... fans at 7V |
not bad... room temp is now 8 degrees lower... CPU boots 20 Mhz higher. 1.712 Vcore - 12*198 = 2378 |
Quote:
You just accomplished a 900MHz overclock. Anyone who criticizes that is just silly. Good job!!! Especially with the Asus board, whilr their excellent boards (best 875/865's out)their nForce-2's weren't as good as Epox, Abit, and Soltek. All the more reason to compliment yourself. :o |
True I got a hypercooled asus A7N2 Deluxe that won't go over 170FSB without stability problems. My epox with much less cooling runs fine at 200 (but 205 is too much) |
All times are GMT +1. The time now is 15:02. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO