Now for the overclocking part I have a p4p800-e deleuxe with no bios updates. I was wondering if a new bios flash would help OC. Also are there any other setting in the bios that would help OC beside FSB, memory refresh rates, and voltages. Anyone else have this board and have any OC problems? Thanks Well after a million restarts this is where I am at. I got it to boot under the following conditions, but it wasn’t stable. If there is anything I missed let me know. Looks like the RAM just doesn’t like being messed with a whole lot. I really wished this would run at 3.4ghz stable. Its not a big deal really I just don’t like not achieving goals. So I am stuck at 3.35…..so close. FYI any attempts to rebooting resulted in a crashed bios and it had to be cleared. I am on a P4P800 deluxe with original bios. I am not real sure how to flash this thing and don’t want to screw it up. FSB 260 RAM 5:4 320MHZ AGP/PCI 66.66/33.33 CPUV 1.675 DDRV 2.85 AGPV 1.6 Performance Mode Auto Chipset 2.5-4-4-8-8 DRAM Idle Timer Auto Refresh Auto Spread Spectrum Disabled ICH Delay Enabled I really thought this system would hit like 3.4 or 3.5.....I am sad |
|
Nicely done; thanks for sharing. My 2.6C won't go anything higher than 255FSB; yet the 2.4C I sold would do 275. So, I guess it is heavily dependent on the chip.:) |
I have a 2.4C here.....you think it would be worth sticking it in and seeing if I can go higher. If I got it higher than a 255 with the 2.4 then I am looking at a CPU limit on the 2.6 right. Thanks by the way |
No sweat;) were you in the Middle East? |
No I was down in South America. I am more than likely heading towards it ME sometime this summer |
time to either lap that HDD or make a window in its top :) |
youre very right about that jmke ;) think i have to start with my windowing my maxtor. but i have a problem, because i wanne put some leds in and there aren't any connections where i can solder the leds on .:grum: |
Cant window that type of HDD. I will polish it better soon though I do have an update on my overclocking though. with the 2.6@3.3 and a 255fsb I would get the following scores 3dmark2k01 21602 3dmark2k03 11857 I wanted to know if my cpu was limiting my fsb or if my ram was so I stuck in my spare 2.4C and I am running 3.19@262fsb 3dmark01 21312 3dmark03 12095 So it was my cpu causing all of this. I am pretty happy right now, because I didnt shell out another 300 bucks for some faster ram. |
Well my side panel got thrown away acciendtly at work so I had to make a new one. I like how the inside looks so I thought I would show it off. I did the whole thing out of plexiglass and it is hand painted. Just a quick note, just by adding the sidepanel I was able to drop MB temps from 36C to 26C and gained 10mhz on the fsb. I am now at 275fsb 1:1 |
All times are GMT +1. The time now is 02:19. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO