WeldZilla 2 "A New Beginning" Extreme mod,not just a few lights and fans - Page 7

16th May 2004, 09:42

it has a bit a look of a siemens computer from the old day's

(the color)

looks nice, the front comes out better

16th May 2004, 20:35

Sometimes people get so caught up in huge lofty ideas. That are not attainable. That they never really do anything but dream. Many have asked me about extreme cooling my rig,or a future rig.
You know the one I have when OC'd to 3637mhz @1.625 volts
only runs 37C at idle. I run an everyday clock of 3200 mhz @1.55 volts @ 30C idle. Why would I think I need more? I am a keep it simple kinda guy. You may think some of what I do is complex, however it is not. I have been working as a fabricator for years. The real key to all of this is patience. Taking on projects that you can afford and that are within reach of your skill levels. I also have noted that many simply lack the confidence and just really do not know how to get started. So they don't start. Too bad, You know if you completely butcher up a mod and are totally disgusted with yourself as long as you learned from the mistakes you made. You are further than you were when you only fantasized about modding. So I encourage all of you to go get a case, any case!! Do not worry about brand. Start with it. I seen some at a Goodwill for $1.50. There are many places that have old used cases lying about. Do not worry about air flow or what have you. That is where you come in. Your job as a modder is to not only change the look of the case but, also to improve on the characteristics of the case. You must start somewhere!! Remember to get anywhere, you must START!!!!!

WeldZilla

10th July 2004, 18:52

Well how about color coordinating?? Ok, got home today tore apart system and cleared my desk off and got busy prepping and painting.
My desk was so dreary just had to change it up! After hitting the entire top with the light blue of the case, I trimmed it with the dark blue.
This will go with my new puter much better!! you guys thought I forgot to finish this?? No way!! The monitor keyboard and mouse are next!!!

WZ

10th July 2004, 18:54

Built some rom racks. Some 3/8 plywood a router with a dove tail bit.
Dovetailed the base, put in a backstop, put in a sliding stop with a reverse dovetail. That way it fits the slot in the base.Does not matter whether you are holing 10 or a 100 roms it will not slide unless you slide it!! Decided to paint them up also.That is it for tonight. Between work and the desk and the rom racks I'm whipped!

WZ

10th July 2004, 18:59

Well since I can't get to the monitor & Keyboard now. I put it all back together. I am happy with the progress so far!!

Remember, it isn't over, til it's over

WZ

jort · 10th July 2004, 21:49

nice desk
some people buy a pc that fits the room (color, disign)
you mod a pc and change your room that match your pc

187(V)URD@ · 10th July 2004, 22:38

maybe change the mousepad ?

10th July 2004, 23:01

yes that mouse pad has to go. Kinda hate that it is the best I've used. the right amount of smooth. Perhaps I can dye it blue?
What can I say I love my mouse pad.

WZ

16th May 2004, 20:35	#62
WeldZilla Posts: n/a	You know: Sometimes people get so caught up in huge lofty ideas. That are not attainable. That they never really do anything but dream. Many have asked me about extreme cooling my rig,or a future rig. You know the one I have when OC'd to 3637mhz @1.625 volts only runs 37C at idle. I run an everyday clock of 3200 mhz @1.55 volts @ 30C idle. Why would I think I need more? I am a keep it simple kinda guy. You may think some of what I do is complex, however it is not. I have been working as a fabricator for years. The real key to all of this is patience. Taking on projects that you can afford and that are within reach of your skill levels. I also have noted that many simply lack the confidence and just really do not know how to get started. So they don't start. Too bad, You know if you completely butcher up a mod and are totally disgusted with yourself as long as you learned from the mistakes you made. You are further than you were when you only fantasized about modding. So I encourage all of you to go get a case, any case!! Do not worry about brand. Start with it. I seen some at a Goodwill for $1.50. There are many places that have old used cases lying about. Do not worry about air flow or what have you. That is where you come in. Your job as a modder is to not only change the look of the case but, also to improve on the characteristics of the case. You must start somewhere!! Remember to get anywhere, you must START!!!!! WeldZilla

10th July 2004, 18:52	#63
WeldZilla Posts: n/a	Desk Modding Well how about color coordinating?? Ok, got home today tore apart system and cleared my desk off and got busy prepping and painting. My desk was so dreary just had to change it up! After hitting the entire top with the light blue of the case, I trimmed it with the dark blue. This will go with my new puter much better!! you guys thought I forgot to finish this?? No way!! The monitor keyboard and mouse are next!!! WZ

10th July 2004, 18:54	#64
WeldZilla Posts: n/a	Rom Racks Built some rom racks. Some 3/8 plywood a router with a dove tail bit. Dovetailed the base, put in a backstop, put in a sliding stop with a reverse dovetail. That way it fits the slot in the base.Does not matter whether you are holing 10 or a 100 roms it will not slide unless you slide it!! Decided to paint them up also.That is it for tonight. Between work and the desk and the rom racks I'm whipped! WZ

10th July 2004, 18:59	#65
WeldZilla Posts: n/a	Together again Well since I can't get to the monitor & Keyboard now. I put it all back together. I am happy with the progress so far!! Remember, it isn't over, til it's over WZ

10th July 2004, 21:49	#66
jort Member Join Date: Jun 2004 Location: mechelen(belgium) Posts: 2,037	nice desk some people buy a pc that fits the room (color, disign) you mod a pc and change your room that match your pc __________________ watercooling, chilled water,direct phase change, cascade, custom modding

16th May 2004, 09:42	#61
StaRflaM Posts: n/a	it has a bit a look of a siemens computer from the old day's (the color) looks nice, the front comes out better

10th July 2004, 22:38	#67
187(V)URD@ Member Join Date: Jan 2004 Posts: 923	maybe change the mousepad ? __________________ AMD Opteron 146@3ghz H2O Storm \| DFI NF4 Ultra-D \| 2512MB Gskill LE \| X800GTO²@X850XT-PE \| 2250GB Hitachi \| Modded Aopen H600B\| Seasonic 600W \| MX510@450HZ \| 19\" TFT BenQ 937s+ \|3DMARK2001 AMD XP2400+@2600+ \| Epox 8rda+ \| 2*256 Twinmos BH5 \| Club3D 9600Pro \| Maxtor 80GB + 200GB \| server + moviestation \|

10th July 2004, 23:01	#68
WeldZilla Posts: n/a	Mouse pad yes that mouse pad has to go. Kinda hate that it is the best I've used. the right amount of smooth. Perhaps I can dye it blue? What can I say I love my mouse pad. WZ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Antec TriCool Fans Review	Da_BoKa	WebNews	0	9th December 2004 15:00