Madshrimps Forum Madness

Madshrimps Forum Madness (https://www.madshrimps.be/vbulletin/)
-   Hardware Overclocking and Case Modding (https://www.madshrimps.be/vbulletin/f10/)
-   -   Rebuild the Winbond honor -GSkill 1GBGH simple test (https://www.madshrimps.be/vbulletin/f10/rebuild-winbond-honor-gskill-1gbgh-simple-test-16194/)

windwithme 18th July 2005 08:53

Rebuild the Winbond honor -GSkill 1GBGH simple test
 
Tomorrow is typhoon holiday. The mood is good and post some delayed test.

Take a look first.


Equipping with 2 holes Winond UTT. It guarantees DDR400 2 2-2-5 2.7~2.9V.
The same level as the famous Winbond BH5.





Specification :
* Package : 512MB kit (2x256MB) 1024MB kit (2x512MB) dual channel pack
* IC Spec : Winbond UTT
* CAS Latency : 2-2-2-5 (PC3200)
* Test Voltage : 2.7 ~ 2.9 V
* PCB Board : 6 Layers PCB
* Speed : DDR 400 MHz (PC3200)
* Type : 184-pin DDR SDRAM
* Error Checking : Non-ECC
* Registered/Unbuffered : Unbuffered
* Quality Control : Comprehensive rigorously tested in pair at dual channel environment
* Warranty : Lifetime

OC Winbond chip still needs higher voltage.
Before OC, except the body, well cooling is also impacting the result.
The same as testing OCZ VX PC4000 DDR500 2 2-2-5 3.3V, I use 12X12cm fan.


Test config.
AMD Athlon64 3000+ 0448&X2 4200+
DFI nF4 LanParty Ultra-D
GSkill 1GBGH
SPARKLE 6200
TOPOWER 520W

Testing with Winchester 3000+ 0448SPAW
DDR400



DDR500 1.5 2-2-0 3.24V



Swap to X2 4200+, it can reach DDR540 SP2004




After comparing Winchester, Venice and X2, we can see the AMD memory controller is getting better.
Combining with DFI LP board, you can reach higher.
Every CPU is different. So you need different BIOS parameters to reach DDR530.

BTW, Winbond chip is still in high C/P.
After adding voltage, it generates more heat. You can add extra cooler to reduce it.
But we cannot see if high voltage will damage the chip in long term use.
As electric moving theory, higher voltage means lower life.
The test above is over office spec. We need better cooling, better memory body and DFI LP board.
I am well trained, please do not copy. Just for your reference :)

kristos 18th July 2005 22:33

nice nice :)

howmuch Vdimm for DDR 540 ?

windwithme 19th July 2005 04:58

Quote:

Originally posted by kristos
nice nice :)

howmuch Vdimm for DDR 540 ?


3.5V:D

kristos 19th July 2005 23:46

now that's really nice :woot:

windwithme 24th July 2005 16:11

DDR550 2 2-2-5 PI 4M


Sidney 24th July 2005 18:03

My GSkill couldn't do anything close; yes, they offer to replace them.

2.5-4-3-8, yet SuperPI score in 32' - unless we find better use of super tight timing, it may be the dog chasing its tail .:)

windwithme 1st September 2005 14:47

DDR546 2 2-2-5 PI 32M




All times are GMT +1. The time now is 15:20.

Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO