Madshrimps Forum Madness

Madshrimps Forum Madness (https://www.madshrimps.be/vbulletin/)
-   Hardware Overclocking and Case Modding (https://www.madshrimps.be/vbulletin/f10/)
-   -   MSI Masters Overclocking Arena 2009 - Qualifiers (https://www.madshrimps.be/vbulletin/f10/msi-masters-overclocking-arena-2009-qualifiers-63772/)

PowerToTheUsers 1st June 2009 21:00

Quote:

Originally Posted by leeghoofd (Post 239078)
Which Pl is that on Johan ?

As I said before: Performance Level is at the middle of the three options. If the options are standard-turbo-extreme, it's at turbo. But I don't know the name of the setting by heart.
At Standard, the system doesn't boot at 530FSB
Quote:

I would give 1.36NB voltage, MCH reference around 0.74 a shot, works fine on my EP45 UD3P till 580FSB... I have noticed on the Rampage extreme if I can't pass that memtest 7 test, that 3druns would be pretty hard to do... P45 remains a very sensitive chipset regarding volts...

Here's the run we did with Blind for the GOOC qualifiers

[IMG]http://s3.photobucket.com/albums/y90/blind_ripper/?action=view&current=Clipboard02.jpg[/IMG]

I had issues with benching 3D over 5.6Ghz due to heat, maybe that's ya issue too
What heat? The northbridge feels like roomtemperature... And CPU is cooled by vapochill. with evaporator-temp on the display hadly above -40°C
I'll try that 1.36Vnb (MCH Core) and 0.74 MCH Ref.

leeghoofd 1st June 2009 21:06

Performance level is TR(R)D (not sure anymore, it's the first one you encounter in that section) in the advanced ram section, the setting you are claiming did nothing to me... check with MemSet Johan, in Blind's piccie it's at 10, mostly I boot with 10 and then lower via MemSet and then run the PI...

My Nb without active fan is pretty warm, indicating good conductivity and that's even at 333FSB with just 1.2NB volts. Plz remove the heatpipe and redo the TIM

jmke 1st June 2009 21:44

first post updated with current standings :)

PowerToTheUsers 1st June 2009 21:47

Quote:

Originally Posted by leeghoofd (Post 239080)
Performance level is TR(R)D (not sure anymore, it's the first one you encounter in that section) in the advanced ram section, the setting you are claiming did nothing to me... check with MemSet Johan, in Blind's piccie it's at 10, mostly I boot with 10 and then lower via MemSet and then run the PI...

Higher PL = Higher FSB possible?

Quote:

My Nb without active fan is pretty warm, indicating good conductivity and that's even at 333FSB with just 1.2NB volts. Plz remove the heatpipe and redo the TIM
I felt at the base below the watercooling part. 3x120mm fans around it do their job :)

Quote:

Originally Posted by jmke (Post 239081)
first post updated with current standings :)

Only two participants?

PowerToTheUsers 1st June 2009 22:27

Quote:

Originally Posted by leeghoofd (Post 239078)
Which Pl is that on Johan ?

I would give 1.36NB voltage, MCH reference around 0.74 a shot, works fine on my EP45 UD3P till 580FSB... I have noticed on the Rampage extreme if I can't pass that memtest 7 test, that 3druns would be pretty hard to do... P45 remains a very sensitive chipset regarding volts...

Here's the run we did with Blind for the GOOC qualifiers

[IMG]http://s3.photobucket.com/albums/y90/blind_ripper/?action=view&current=Clipboard02.jpg[/IMG]

I had issues with benching 3D over 5.6Ghz due to heat, maybe that's ya issue too

Current memset-settings, used from 530 to 570MHz: http://www.johanlemaire.be/OC/E8600/memset.JPG
As the memory clocks all the way up to 570MHz with those settings, I don't think there need to be much changes.

I think I lost the right CPU/PCIe clock drive and CPU/MCH Clock skew. I couldn't run 545MHz anymore a few seconds ago.

jmke 2nd June 2009 11:08

Quote:

Originally Posted by PowerToTheUsers (Post 239083)
Only two participants?

50% chance to win :)
you only need to beat MM's scores,

leeghoofd 2nd June 2009 11:36

Try to bench at 5.55 3D Johan you can breach 101K for sure (try maybe 11 PL). Try to give the CPU more FSB term voltage for higher speeds... Seems yours is volt hungry. Hope you can make it dude ! And in the worst case scenario hopefully you can join the Massman at the contest. Now I know why he kept my board and the Blades lol....

jmke 2nd June 2009 11:37

yup, at the end of the day we can send two people to Tweakers.net to beat them all and hope for qualification :D

leeghoofd 2nd June 2009 11:49

Teamname : Power To The User Massman :p

Massman 6th June 2009 11:58

Too bad I can't submit the 32M of the GOOC finals :p

jmke 6th June 2009 12:20

unless you took home all the hardware you used;)

Massman 6th June 2009 12:32

Seriously?

Because ...

leeghoofd 6th June 2009 12:34

I knew it !!!!!!!!!!!!!!!

jmke 6th June 2009 12:38

Quote:

Originally Posted by Massman (Post 239393)
Seriously?

Because ...

then it is your hardware and you are allowed to posts results with ... your hardware :D

the only catch is... this competition is ... SuperPi 1M :D

jmke 6th June 2009 12:39

hmmm... lol, today is June 6, competition ran until 5/6; you won Massman ;)

Massman 6th June 2009 12:47

So ... I have to go to the Tweakers.net labs?

jmke 6th June 2009 12:50

and you can take a friend
Quote:

will go to the Netherlands on June 13th
so next Saturday

Massman 6th June 2009 15:04

I'll be teaming up with Pt1t again.

@Johan: please don't mad/disappointed about this :(. When the online qualifiers for the MAO event were announced, Thomas and me said we'd be teaming up if one of us won. If it's any consolation: he did annihilate both you and me in the SPI competition and if he knew the competition ended the 5th, he'd probably smash both of our 3D scores as well.

PowerToTheUsers 6th June 2009 17:46

Geen probleem. 2e worden is een mooi resultaat, alleen jammer dat het maar op 2 deelnemers is...

Massman 6th June 2009 17:47

Er is héél weinig animo dit jaar ... zelfs in NL zijn er slechts 2 scores gepost :-/

leeghoofd 6th June 2009 18:00

any mad reporter allowed to go ?

Gamer 6th June 2009 21:08

1 Attachment(s)
I could have won :)

Massman 6th June 2009 21:12

:p :p

jmke 6th June 2009 23:21

couldawoudashouda ;)

PowerToTheUsers 7th June 2009 19:01

Quote:

Originally Posted by leeghoofd (Post 239088)
Try to bench at 5.55 3D Johan you can breach 101K for sure (try maybe 11 PL). Try to give the CPU more FSB term voltage for higher speeds... Seems yours is volt hungry. Hope you can make it dude ! And in the worst case scenario hopefully you can join the Massman at the contest. Now I know why he kept my board and the Blades lol....

No 101k yet, but at least I've got 100k :woot:
http://www.hwbot.org/result.do?resultId=861700

Massman 7th June 2009 19:05

Very good!

jmke 7th June 2009 19:11

congratz! :)

Massman 7th June 2009 19:12

What kind of tweaks? Something we can help you with?

PowerToTheUsers 7th June 2009 19:29

Quote:

Originally Posted by Massman (Post 239459)
What kind of tweaks? Something we can help you with?

I'm just running a few more benchmarks with the hardware from this competition. On 3DM01 I was too close to 100k to leave it unbroken ;)
I used some tweaks offcourse, but I've got the feeling the CPU reached it's maximum at about 5.35GHz. Not bad offcourse.
I'm finishing the GTX285-benches, next I will put my 9800GX2 in the board.

PowerToTheUsers 7th June 2009 20:59

Quote:

Originally Posted by leeghoofd (Post 239088)
Try to bench at 5.55 3D Johan you can breach 101K for sure (try maybe 11 PL). Try to give the CPU more FSB term voltage for higher speeds... Seems yours is volt hungry. Hope you can make it dude ! And in the worst case scenario hopefully you can join the Massman at the contest. Now I know why he kept my board and the Blades lol....

101k, even without 5.55 ;)
http://www.hwbot.org/result.do?resultId=861767

And a few other results :)

blind_ripper 7th June 2009 21:05

i know who u feel powertotheusers ;).
http://www.hwbot.org/result.do?resultId=730949

PowerToTheUsers 7th June 2009 21:41

In total, 30 results have changed in rank or points, causing you to gain 54.5 hwboints in the past 7 days.

Yay :D

Pt1t 8th June 2009 08:18

Quote:

Originally Posted by Massman (Post 239402)
I'll be teaming up with Pt1t again.

@Johan: please don't mad/disappointed about this :(. When the online qualifiers for the MAO event were announced, Thomas and me said we'd be teaming up if one of us won. If it's any consolation: he did annihilate both you and me in the SPI competition and if he knew the competition ended the 5th, he'd probably smash both of our 3D scores as well.

Thanks mate ! And i joined Back Madschrimps OC be team on HWbot :woot:

jmke 8th June 2009 08:25

welcome to the winning .BE team :D
with your total with the team we're boosted to 15th place!

blind_ripper 8th June 2009 09:11

Quote:

Originally Posted by jmke (Post 239497)
welcome to the winning .BE team :D
with your total with the team we're boosted to 14th place!

15 john ;).

leeghoofd 8th June 2009 12:41

Bienvenue Thomas :) nice to have another big boy here

Gamer 8th June 2009 19:03

Hey, welcome !!!
Glad you joined our team.

leeghoofd 18th July 2009 20:06

who won now ? Such bad exposure for such a big event

results :

1. Poland
2. Greece
3. Sweden
4. Finland
5. Denmark


All times are GMT +1. The time now is 21:55.

Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO