Yeah, luckily she comes home....

I can drop them in your mailbox?

Just test the 285's (hope you get a 3rd one) together with the Blades once all that is done I'll rebench the whole S478 stuff...

Just having fun, I can ben almost 170mhz more with the SS :) and ze tuned by MM mobo... will need to pickup my SSD too (faster Vista loading) and then redo wprime en co...

That SSD gives 1K more points in PC05 with those notebook CPU's.

I'll drop it off at your place, tell me when I can (wednesday should be ideal).

9 cpu's still inbound, 530 has FSB wall at 230 :( :( :(

Keep the SSD then till you got everything done, I need to await the BH5 rams to get better scors in pi and pifast, limited here with 2 512Mb stick of 2.5-3-3-8 PC3200... and maybe some Acard fun (if the Waregemse Gods are with us ) I'm already happy went from 2.2 to 2.4Ghz stable... if I can nibble with each cpu 150-200mhz more I'll have a blast... but no big points but just pure cheap fun

I have time, loads of time (but not right now lol)

HWbot is scrambled it seems :)

Lost my gold on the T2400, wtf, lunatic started benching again.

5 CPU's arrived today, no gold with T2080 :(

Got my 3 celerons from the UK, hope top 5 and to get about 10-15 points per CPU...

Celeron 410 benching now, hardest gold to get.
Just one mhz more than previous best :)

Tests ended, only PC05 but need a better GPU card, JMke you have one to spare ? :)


Good luck Leeghoofd !!

Damnit, that other guy just benched the same CPU today, what are the odds ????
And he has taken gold :(

wow, T2060 1.6 @ 3.3.
100 % overclock on a mobile cpu, never been done before I think ?

http://valid.canardpc.com/show_oc.php?id=662777

http://valid.canardpc.com/show_oc.php?id=324370 :p

hehe, ok :)
I can even do PI with that speed.

I still need to add 1.5GHZ extra cpu power.

WOW, great start !!!

I think the cards are pretty much maxed out it these clocks; might be able to push the memory a tad higher, but core/shader increase equals lockups

blijve gaan met de :banana: tot ze :nana:

Seems like this MSI board doesn't appreciate three cards and a D0 cpu ... instead of 227MHz, I now fail at 215MHz BCLK :-/

Want me to build out the REX II ? Not sure if it's any better though... Maybe try AM3 mate with 2 cards, 370K should be possible with the CPU around 5Ghz

Classified still here, if you want it I can send it.

I'll see if I can get any better tomorrow first

Hm, seems like I'll be needing the Classified anyway: MSI doesn't do that much better under single stage and the DFI isn't doing any better than on the 965.

Can I pick it up tonight? :D

Yes You Can.

MSI plus is also ready for you to pick up :D

you did well torsten nice scores :) is it possible to ask Tones for one Quad 45nm CPU Q9550 or Q9650 ? Normally the Maximus Gene II is soon on the way to me would be nice to test it with a quad CPU too

post removed - this is 4 secure sections ;)

While your at it, S1366 xeon motherboard too :p

He has some nice cpu's, but not willing to test them it seems :p

results in a minute :p

:o :o

woot, 6K again :)

Results from yesterday's testing. I'm pretesting the 950/Classified combo on single stage again; 4.6G boot is now possible :woot:

next up 4.8 and then boosting the ram speeds +2000 ?

Blades don't seem to work that will with the classified :-/

???
we did +2200mhz before ? CPU IMC ?

No idea; with my OCZ platinum no issues. Blades are fully functional ...

Might be a bios issue; SPD's or so

same classi we used last time ;).
go easy on the vcore, if u need cascade or the other 950 just call ;).

Ready to roll

Same 230MHz BCLK wall ... Gamer, you might want to RMA this board and hope for a better sample ;-).

ram speed ? CAS 7 bug ? as it ran fine with C8-9-8 at +1100, which bios ?

Hmm, should be.
Damnit :(

No, this was not with the Blades: I switched to my OCZ Platinums instead (have quite good bandwidth). I tried the Blades in the end and could get them to work at 1100+ CL8, but the system was unstable.

It really seems like this motherboard doesn't do over 230MHz BCLK that well: Gamer's 3540, Blind's 950 and my 950: all max out around 230x23.