Help me playing with the DFI NF3 I wanna play with my girlfiends pc (sounds weird i know:p) BUt i am not into a64 oc'ing so i could use some help from you guys. Setup: DFI NF3 250GB 3000+ Clawhammer caaoc 0352XPMW 512 MB corsair pc3200 rev1.2 Readon 9800PRo 2*80GB SATA maxtor connected at sata ports 3&4. I set HTT to 3x Lowered ram speed (166) @2.9V set Vcore to 1.55V Then upped FSB true clockgen slighty up till i got a bluescreen 235MHZ(something about HD drivers). |
move 2*80GB to SATA ports 1&2 |
Ah oke someone from XS said 3&4 but i believe you :p |
it's either 1&2 or 3&4 :) |
gonna flash bios first beceuse original bios had some problems with overclocking. |
Murda, read your PM when you have the time, kthxbye ,) |
done bzrk, i am on irc also :). Anway I booted directly on 255mhz and my ram is on 227mhz@3.18V. Gonna test how this CH5 is doing :p. Next time I am going to bring my BH5 :D EDit : mem doing 240mhz atm |
243mhz and my CH5 chrashed @3.18V. Not bad for CH5. Could only overclock the cpu too 2350MHZ@1.7V (don't know how far i can go with the voltages on A64). Cpu temp didn't raise over 38°C. Well yeah and the motherboard I went up to 350HTT and still havent found his limit. :) |
Shouldn't you be playing with your girlfriend instead? :p :) If your memory is holding you back you can try to burn it in. Some chips, not just winbonds, are sensitive to that. Search for "uwackme-burn-in" guide. I know it helped the VX I used to use and got me 9 mhz on the fsb more at the same voltage (3.2v). |
Yeah i did read a yesterday or a day before yesterday. Gonna try it when i am back at her place. But the ram isn't holding me back atm, its the cpu who can barely reach 2350mhz :( |
Do you guys always set apic too disabled in BIOS before installing operating system? Edit: Because I can't the cpu higher then 2350mhz (ram set on 166mhz and HTT 3x vcore 1.7V so) and maybe apic has something to do with it. |
Do you guys think its worth me flashing my bios on my DFI NF3 from the original? my 3000+ newcastle can do 2.65Ghz stable at 1.7vcore i think And what cooling u use to get such low temps? |
at gf place simple box aircooling with as5 and good caseflow. |
can someone explain me this error : -------------------------------------------------------------- NVIDIA RAID IDE ROM BIOS 4.66 Copyright (c) 2004 NVIDIA Corp. Detecting array ... _ --------------------------------------------------------------- i always get that error when i try to set the HTT to 300mhz (i use divdiers so nothing can hold me back...) (dfi lanparty ut nforce 3 = my mobo) |
All times are GMT +1. The time now is 07:34. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO