thx Kristos

Did it help with your mobile to get a higher fsb?

duploxxx

actually, I havn't tried it yet untill just now:gay:

But since you asked I figured I might just as well do this now instead of postponing it again (I'm very good at that you know :king: )

I knew it worked though since a friend of mine has the same mobiles as I do (I ordered them through him, they're even from the same batch :)), and he gets about 22x fsb without l12 mod and about 24x with l12 mod.

He does it the old way btw, just connects the 3rd l12 bridge with a pencil, giving him 166 fsb setting by default. De doesn't even cover the laser cut with something none conductive, he just draws right through :D


I connected ah 28 with ah 30 as instructed on this page:
http://www.geocities.com/trats102002/nf7sFsbsense.html
this should of given me a default fsb of 200. It didn't work though.
I don't know why yet. I might have bad contact, I might not have the sort of mobile that is discribed on that page. Or the info may be wrong but that's something for tomorrow :)

thats a nice fsb. on what mobo? i am afraid my epox 8rda3+ won't cope with the 24+ fsb

but still nice to know that it could work, i'll check it out

duploxxx

he has always used abit nf7 (-s?) rev.2.0 in the past (killed 3 or so through various means of abuse :D)
The only other socket A boards capable of such speeds by my knowledge are the DFI lanparty/infinity rev.B's.

wel dit some test yesterday...

at vdimm 2.9 my bh-5 at 2-2-2-11 reaches de limit on 221fsb
i tought that was limit of mobo or proc

however i've relaxed the bh-5 a little to 2-2-3-11 and i get a nice
237fsb :) on multiplier 8.

using this on multiplier 11 with 230 reaches again the limit of the proc at 26++ but the pifast results are worse then 218*12

i think its the max for my proc.... upping Vcore to 1.9 doesn't help me

maybe different cooling might help...

duploxxx