I got a vr with one pin up, 2 down.
solder pin 1 on to card, pin 2 (left one if vr is down with the 2 pins).
Now i measure 0,40kohm from pin one to pin 2.
So, I'm ok ?

Do you increase voltage when in windows ?
When I increase voltage above 1.5, I get a freeze ?

So if you have only 0.4 resistence between pin 1 and 2, you mustn't solder those pins. Otherwise, you'll burn the card.

(Ps.: be sure to measure the resistence BEFORE you solder to the chip!)

you got a photo of your VR gamer?

Vmod works, only when going above 1.7v it goes fast, a mm = 0,5v more.

This IS the max I can get out of it on stock cooling.
Your turn Troman, Blind and all you people out there : |D |D |D |D

http://service.futuremark.com/compare?2k1=9220694

:ws: :ws:

I'm the master of this competition... :naughty:

nice one:) and I see you switched drivers:) what cooling do you have on the 7300GT?

Still stock cooler.

good to know:)

I was supprised it can take that amount of heat, vgpu 1.8.
Just some extra coolers.

It must be a supercard :)

holy poop! The old man knows how to OC!

getting close to world record (907/1066)
http://www.hwbot.org/searchResults.d...nts=&limit=200