Evga 7600GT (for Gamer)
 

Voltage of the GPU

• Standard voltage = 1.30v
• IC: RT9232
• Link to datasheet
• FB = pin5 = 622 ohm => 5k or 10k VR between pin5 and GND (pin7)
• No OVP, no OCP

Voltage of the MEMORY

• Standard voltage = 1.90v
• IC: RT9232
• Link to datasheet
• FB = pin5 = 594 ohm => 5k or 10k VR between pin5 and GND (pin7)
• No OVP, no OCP
• Memory type: Samsung K4J52324QC-BJ11
• Maximum voltage determined by manufacturer: 2.5V

Voltage measurements



OC results

Not tested.

Gamer: should I do the actual soldering? Or can you do it at home?

What do you think he prefers? :D

Hehe, I can't solder, I always use smd grabbers :)

You can do it PJ.

I don't have any 5k VR's lying around anymore. 10k is good for low increase in V, but you'll need 5k if you want to increase voltage by a lot and still have some decent control over it.

Do what you think is best.
If the card survives the test, not needed :)

Ready :)

Can't be :p

I didn't even need a month

No way !!