DRAM Configuration I got 256MB Advance Module PC 3200(200MHz) this is my current Dram config, but when i change DRAM Clock to 200 MHz my computer cannot boot up. so i need help to know what the correct setting that can get to 200MHz |
My FSB speed is 166MHz max,could this is the problem why i cannot increase DRAM Clock to 200MHz |
Is this running intel? |
AMD |
My guess is that your cpu cant handle the speeds your putting it on. Lower your mulity. and then increase your fsb. If your running on an nforce 2 mobo put your mem:fsb ratio to 1:1. |
my mobo is KM400 MSI. 166MHz is max in this mobo cannot increase any further. is there have any other solution for this 200MHz problem |
You could use a divider so the ram runs 200mhz and the fsb stays at 166mhz but keeping the ram at the same speed as the fsb gives better performance. |
if keep the fsb and ram at the same speed will gives better peformance the i will not change the ram speed to 200MHz. thanx for the infos |
All times are GMT +1. The time now is 11:56. |
Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO