Ok this type of cooling rules hard, but damn the expence.
I would try that ****, but a guy with a small budget can never afford those things. I'll try and make something like it myself though (allways do it yerself, y'll do it better) :king:

Anyway the cooling only getting just below the 0°C is pretty weird. It should really be a lot colder, if the hardware would be a little better. About a year ago I saw the pc from the guys of cryotech. They had a system running a athlon 800 @ 1.86gig with some nice freezer and the temps were about -25° idle if I recall it correctly

those are evaporator temps... the idle evaporator temps on these machines (prometheia and eva) go to -38 and more...
Even with evaporator temps going as low as this, idle temps still won't be below -10...

I have indeed been mistaken. the temps were the evap temps, and It wasn't -25°C but -40°C.
My memory let me down, luckily I found that site again, too bad they don't sell any homepc anymore

http://www.kryotech.com/index2.html

idle results around -40 on evap are what we see mostly at the moment.

got the vapo up and running, not a better result :(
I think my ram is maxed out ...

172x16 highest setting and it is't stable...

hmm, going to shop and get my 2.26, it's just in
see what this baby can do.

if it is 172x17, it would be nice, but not what I expected
:grum:

temp: evap : -18
cpu 8° idle, 25° stressed.

ram maxed out? at 3*172... possible...

maybe the chip is at his max... it's possible you get your 2.26 well over 3 gig, don't worry...

should indeed go "way" over 3 gig with vapo. I can run 180x17 on it-7 with 2/5/2/2 stable on air

Bicker, you got DDR, Ive got RDRAM, not the same :)

Damn, did try anything that could help, nothing..
this :puke:

someboby knows if the wiretrick is the same as on the 400 mhz versions ?
didn't find anything about that on the net...

fsb@172 is fsb@172 no?

ask here, it's were all the overclocking guru's hang out. :)

Damn, so long waiting for the conversion kit and no improvement... :grum: